Help. KWA Mac 11

heyds · March 26th, 2010, 19:48

I know I created a thread similar to this in another part of the forum, but I never really got my question answered, and the thread is pretty much dead. Plus my problem is seemingly getting worse and worse as the days pass...

So here it goes...

My KWA Mac 11 shot very well after I first got it, but lately (about 3 weeks after I first shot it maybe more or less) the bbs are getting jammed in the hopup rubber before entering the barrel. The first few shots of the clip will be fine, but all of a sudden one will get lodged in between the rubber. When I shoot another after that the bb that was lodged gets pushed forward and the bb I just shot gets lodged. Now my question that wasn't answered (although I assumed it was a bb problem) was what is causing this. I am using generic bio bbs, which I plan on changing soon, but I was just wondering if that was the only possible problem. Could it be a loss of pressure? Is there a problem with my hopup? Is it a lubing issue? Any information would be extremly helpful, and is greatly appreciated.

Regards,
Heyds

msdtyu1 · March 26th, 2010, 20:57

what kind of bb are you shooting?

heyds · March 26th, 2010, 21:42

Quote:

Originally Posted by msdtyu1

what kind of bb are you shooting?

Cyber gun 0.2 bio bbs (generic)

scurvythepirate · March 26th, 2010, 21:45

Quote:

Originally Posted by heyds

Cyber gun 0.2 bio bbs (generic)

Problem right there

Shooting Addict · March 26th, 2010, 21:46

Quote:

Originally Posted by heyds

Cyber gun 0.2 bio bbs (generic)

Shitty bb's are probably getting jammed in the hopup since they have a low consistency from bb to bb and probably seam lines+other flaws. Try switching to bastards that should solve your problem.

Drunk_Albertan · March 26th, 2010, 22:05

I have 2 of these, and they are very finicky on what bb's to use. I've used KSC, Madbull, and Metal Tech. MadBull's were crap, MT's were not too bad, and the KSC were great. Clean your mags and bolt etc and it will treat you good.

Have not had the opportunity to use bastards but I have yet to hear anything bad about them.

Shooting Addict · March 26th, 2010, 22:12

Quote:

Originally Posted by Drunk_Albertan

I've used KSC, Madbull, and Metal Tech. MadBull's were crap, MT's were not too bad, and the KSC were great.

Fuck it use BB Bastards, they work flawlessly in all my guns, plus your supporting a fellow Canadian airsofter.

Con Murder · March 26th, 2010, 22:42

The last two guns I put new inner barrels into had been used with around 2,000 cybergun bio bbs (arctic white and the green shit) so I put them into the persons case to return them. After showing them the gun and having them test fire it I pulled out the old barrel and cleaned it right in front of them. Both guys will not use any bios again cuz they seen the residue and know that 6.03mm leaves no room for error.

Forever_kaos · March 26th, 2010, 22:56

Throw them out or pick up a grenade to use them in, pick up some nice quality BB's
(BB Bastard)

Give your barrel a good clean, enjoy your Bastards

heyds · March 27th, 2010, 11:42

Ok, thanks all. Based on all this feedback, it relieves me to know it is most likely a bb problem.

I will pick up some better ones as soon as I can.

Regards,
Heyds

cooney · March 27th, 2010, 11:46

We told you stop using bio cyber shit bbs and you haven't tried bastards yet?

heyds · March 27th, 2010, 12:12

Quote:

Originally Posted by WMK

We told you stop using bio cyber shit bbs and you haven't tried bastards yet?

I know I was just making sure it couldn't have been another problem. And I plan on picking up bastards as soon as i can

Home	Forums	Register	Gallery	FAQ	Calendar
Retailers	Community	News/Info	International Retailers	IRC	Today's Posts

British Columbia	Alberta
BCAC	EAR
Op-For	JOC
Northern Arms Airsoft	Skunkworx Airsoft
Airsoft Kelowna	RAAT
Prince George Airsoft	Manitoba
Saskatchewan	MAA
SK Airsoft	Ontario
PDW	Airsoft Ottawa
South Sask Mercs	Snow Dragons
Quebec	1st Ranger Platoon
PQAC	Wolfpack Tactical
1st Pathfinders Regiment	TTAC3
Quebec Airsoft
MTX Airsoft	Atlantic
FAQc	Atlantic Airsoft

March 26th, 2010, 19:48	#1
heyds Trader rating Join Date: Jan 2010 Location: Ontario	Help. KWA Mac 11 I know I created a thread similar to this in another part of the forum, but I never really got my question answered, and the thread is pretty much dead. Plus my problem is seemingly getting worse and worse as the days pass... So here it goes... My KWA Mac 11 shot very well after I first got it, but lately (about 3 weeks after I first shot it maybe more or less) the bbs are getting jammed in the hopup rubber before entering the barrel. The first few shots of the clip will be fine, but all of a sudden one will get lodged in between the rubber. When I shoot another after that the bb that was lodged gets pushed forward and the bb I just shot gets lodged. Now my question that wasn't answered (although I assumed it was a bb problem) was what is causing this. I am using generic bio bbs, which I plan on changing soon, but I was just wondering if that was the only possible problem. Could it be a loss of pressure? Is there a problem with my hopup? Is it a lubing issue? Any information would be extremly helpful, and is greatly appreciated. Regards, Heyds __________________ --------------------------------------------------- "I know not with what weapons World War III will be fought, but World War IV will be fought with sticks and stones." - Albert Einstein ---------------------------------------------------

March 26th, 2010, 22:05	#6
Drunk_Albertan Trader rating Join Date: Aug 2006 Location: Calgary, Ab	I have 2 of these, and they are very finicky on what bb's to use. I've used KSC, Madbull, and Metal Tech. MadBull's were crap, MT's were not too bad, and the KSC were great. Clean your mags and bolt etc and it will treat you good. Have not had the opportunity to use bastards but I have yet to hear anything bad about them. __________________ Age Verifier for Calgary, PM me.

March 26th, 2010, 22:42	#8
Con Murder Trader rating Join Date: May 2009 Location: Lethbridge Alberta Canada	The last two guns I put new inner barrels into had been used with around 2,000 cybergun bio bbs (arctic white and the green shit) so I put them into the persons case to return them. After showing them the gun and having them test fire it I pulled out the old barrel and cleaned it right in front of them. Both guys will not use any bios again cuz they seen the residue and know that 6.03mm leaves no room for error. __________________ Con Murder Dark Rhino L.A. Airsoft

March 26th, 2010, 20:57	#2
msdtyu1 Trader rating Join Date: Sep 2009 Location: north bay ontario	what kind of bb are you shooting?

March 26th, 2010, 22:56	#9
Forever_kaos Trader rating Join Date: Oct 2006 Location: Mississauga.	Throw them out or pick up a grenade to use them in, pick up some nice quality BB's (BB Bastard) Give your barrel a good clean, enjoy your Bastards __________________ Johann Hansen. 1./SS-Pz-Gren. Rgt. 20. 9th SS Hohenstaufen. Ontario's Largest WW2 re-enactment. OP Woodsman. Join us!

March 27th, 2010, 11:42	#10
heyds Trader rating Join Date: Jan 2010 Location: Ontario	Ok, thanks all. Based on all this feedback, it relieves me to know it is most likely a bb problem. I will pick up some better ones as soon as I can. Regards, Heyds __________________ --------------------------------------------------- "I know not with what weapons World War III will be fought, but World War IV will be fought with sticks and stones." - Albert Einstein ---------------------------------------------------

March 27th, 2010, 11:46	#11
cooney Trader rating Join Date: Sep 2007 Location: Hamilton, Ontario	We told you stop using bio cyber shit bbs and you haven't tried bastards yet?

Help. KWA Mac 11

Doctor's Corner