June 18th, 2015, 09:47 | #931 |
A part fell off my gun last week.
a Tm G17 custom, G17-9, its front the blowback housing, I remove the part and the gun still seems to fonction properly. The gun have many upgrade parts. Probably a assembly error from my part. What's the fonction of that part? feeling the space? Side note: the first time I disassemble the gun I notice a big rubber Ring between part g17-5 and G17-8 that was not on the part chart. The screw (g17-6) might not be long enought to keep the G17-9 in place. I have the Airsoft Surgeon Super Hard Loading Nozzle for Marui Glock 17 / 26 Thanks |
|
June 19th, 2015, 09:32 | #932 |
I think that part works as some sort of guide to the nozzle.
Where do you people find Airsoft Surgeon nozzles? |
|
June 19th, 2015, 10:42 | #933 | |
Quote:
Classifieds. AS nozzles are not made anymore, so you have to find them off the people that bought them originally.
__________________
Commandment 1 of LMGesus: Fuck getting kills. That's the job of your teammates, otherwise known as the cannon fodder. Your job is to be scary. |
||
June 20th, 2015, 02:38 | #934 |
Green Synergy
|
They're nice but other alternates exist. I've had great results with the GunsModify nozzle and a third party piston head. I'd avoid the metal options though.
|
June 20th, 2015, 02:44 | #935 | |
Quote:
I broke three of them in 1 week successions. I'm not even joking. One cracked at the body and the other two had the exit hole crack.... Metal ones aren't that bad to work with either. You just have to know how to manipulate them...
__________________
"May you fight with the strength of ten full grown men." |
||
June 20th, 2015, 02:48 | #936 | |
Green Synergy
|
Quote:
|
|
June 20th, 2015, 02:49 | #937 | |
Quote:
You don't need to worry about this part for the most part but you should definitely have it in there. Find a way to secure it. Glue it on or something....
__________________
"May you fight with the strength of ten full grown men." |
||
June 20th, 2015, 02:52 | #938 | |
Quote:
Normal mags too. with stock everything else. SO I never buy them anymore. But that's just my experience anyways...
__________________
"May you fight with the strength of ten full grown men." |
||
June 20th, 2015, 02:58 | #939 |
but to be honest with you, I've been out of G-Mod's product line lately. I wouldn't know what a decent replacement would be for that AS muzzle kit or if the G-Mod nozzles are better now.
I got my G-Mods when they first came out. I still have a few of those "first gen" ones. Knowing G-Mod, they might've came out with a million other versions by now. Last I checked they on Version 2 of their nozzle kits. I should really start building my Glocks again. lol.
__________________
"May you fight with the strength of ten full grown men." |
|
June 20th, 2015, 22:42 | #940 |
I currently use the UAC G17 Aluminium nozzle. With the original piston head setup I'm getting about 265 FPS on .25 (310 FPS on .20). It is probably a serious contender to the AS Super Hard Nozzle.
|
|
June 25th, 2015, 18:04 | #941 |
Green Synergy
|
Dual Recoil Spring prototype for TM Glock 17 Gen 4. We'll see if it does anything else besides look nice.
|
June 26th, 2015, 08:44 | #942 | |
The first G-Mod nozzle of mine broke after 2-3 rounds. But G-Mod told everyone to take a pictures about their destroyed nozzles, give an address and they would send a replacement for free.
I got 2 from them and since then I have been using those. No issues so far. One even worked with CO2 magazines. Quote:
Does anyone have experience with GunsModify slides and barrels? They seem to come for a decent price with many accessories. Last edited by emp3ror86; June 26th, 2015 at 08:46.. |
||
July 8th, 2015, 15:17 | #943 |
So I got another SD 150% hammer spring. But I'm still not able to fire the gun when its hot out. I am still getting light strikes. IO have to bleed propane out of the mags for it to fire.
What is going on? I was under the impression when you upgrade the gun to work on propane...it would well...work. Why am I getting continued light strikes :/ Have a metal slide, with the guarder frame, airsoft surgeon piston, SD 150% hammer spring and recoil spring.....cant fire in 30 degree weather without venting the mags....indoors 40+ shots per mag :/
__________________
Commandment 1 of LMGesus: Fuck getting kills. That's the job of your teammates, otherwise known as the cannon fodder. Your job is to be scary. Last edited by daishi; July 8th, 2015 at 15:43.. |
|
July 10th, 2015, 11:47 | #944 | |
Quote:
I would check your firing pin and stuff to make sure there is no binding of any kind. Either that or you modify the firing pin extensively altogether. There's a myriad of things to look at really. it's hard to tell what's wrong if i dont have the gun in front of me. Worst case scenario, you can send it to a gun doc. What's your hammer assembley made up of?
__________________
"May you fight with the strength of ten full grown men." |
||
July 10th, 2015, 16:00 | #945 |
The hammer assembly is stock except for the spring and valve knocker which are from SD (steel).
__________________
Commandment 1 of LMGesus: Fuck getting kills. That's the job of your teammates, otherwise known as the cannon fodder. Your job is to be scary. Last edited by daishi; July 10th, 2015 at 16:02.. |
|
|
Bookmarks |
Thread Tools | |
|
|