VIDEO: Plastic mechbox Firepower P90 running on an 11.1V li-po battery

AngelusNex · April 5th, 2009, 20:30

mechbox and cylinder are a clear strong feeling plastic. The gears seem to be made or the same stuff as TM pistons, same with the piston.

I wouldn't be surprised if we cracked it open and found out that all the plastic evolved into something stronger than diamond.

Crunchmeister · April 6th, 2009, 00:32

Quote:

Originally Posted by Sepulcrum

mechbox and cylinder are a clear strong feeling plastic. The gears seem to be made or the same stuff as TM pistons, same with the piston.

I wouldn't be surprised if we cracked it open and found out that all the plastic evolved into something stronger than diamond.

Yeah, they're more than likely polycarbonate, since it's a relatively cheap, durable and easy to mold / work material. But next time, we need to take it apart before the test to inspect the internals. With the clear mechbox, it shouldn't be to hard to see. lol Then we can connect it to the car battery and film the imminent destruction....

pabloski · April 6th, 2009, 00:36

Quote:

Originally Posted by Crunchmeister

Yeah, they're more than likely polycarbonate, since it's a relatively cheap, durable and easy to mold / work material. But next time, we need to take it apart before the test to inspect the internals. With the clear mechbox, it shouldn't be to hard to see. lol Then we can connect it to the car battery and film the imminent destruction....

so im guessing the next vid will be on sat or sunday right?

Crunchmeister · April 6th, 2009, 00:39

Probably not. Next game, whenever that is...

pabloski · April 6th, 2009, 00:46

Quote:

Originally Posted by Crunchmeister

Probably not. Next game, whenever that is...

lol ok just let us know

Crunchmeister · April 6th, 2009, 00:49

Oh, one of will. You can be sure of that!

pabloski · April 6th, 2009, 00:50

Quote:

Originally Posted by Crunchmeister

Oh, one of will. You can be sure of that!

lol goood i cant wait for the results... hey i wonder what would happen if u revved the ngine while the gun is dry shooting

Huron · April 6th, 2009, 00:58

Just remember to stay the hell behind that blast shield. We don't want to lose anybody to an "Undisclosed Clearsoft Incident".

lemegacool · April 6th, 2009, 00:58

Quote:

Originally Posted by pabloski

lol goood i cant wait for the results... hey i wonder what would happen if u revved the ngine while the gun is dry shooting

nothing... there is a regulator on the alternator witch gives approx 13.5-14v at any speed

Quote:

Originally Posted by GabeGuitarded

Just remember to stay the hell behind that blast shield. We don't want to lose anybody to an "Undisclosed Clearsoft Incident".

lol i dont think, even in the most extreme failure of the gun, that it would not do anything that could possibly harm someone lol

sushi_boy604 · April 6th, 2009, 01:00

Man a lipo battery almost killed my TM MP5. How the hell can that not break! haha nice work guys.

aZn_triXta07 · April 6th, 2009, 01:17

This just comes to show you that even SHITSOFT can make a stand.

If the externals aren't too bad you think it'd be worth dumping a new V6 mechbox in it or something?

Strelok · April 6th, 2009, 01:24

http://www.youtube.com/watch?v=Z4Tyv...eature=related

Might be a repost, but it looks like killbucket ran a test on the AFTERMATH Broxa in a simular manner. While it is all metal gears and stuff, a lot of people tend to considor it a shit gun.

Looks like its holding up well to me!
(This video was taken after he had done a one and a half minute run with it, the battery died on him before, lol.)
________
Website Host

wildcard · April 6th, 2009, 01:30

Quote:

Originally Posted by sushi_boy604

Man a lipo battery almost killed my TM MP5. How the hell can that not break! haha nice work guys.

I got a bald piston and gear on one of my Inokatsu pig because of a lipo, definitely not putting one of those in any of my aeg anytime soon.

Erennert · April 6th, 2009, 01:37

I'll stick to my 8.4v Thank you very much.

sushi_boy604 · April 6th, 2009, 02:23

Quote:

Originally Posted by wildcard

I got a bald piston and gear on one of my Inokatsu pig because of a lipo, definitely not putting one of those in any of my aeg anytime soon.

Same here. I asked Kos what i needed for it to work with lipo. Not worth it to me. My single shot is iffy. Sometimes it wont fire unless i switch it to full and back to single again. Sucks for CQB games since they only allow single fire. I had to keep switching it to full and single back and forth.

Home	Forums	Register	Gallery	FAQ	Calendar
Retailers	Community	News/Info	International Retailers	IRC	Today's Posts

British Columbia	Alberta
BCAC	EAR
Op-For	JOC
Northern Arms Airsoft	Skunkworx Airsoft
Airsoft Kelowna	RAAT
Prince George Airsoft	Manitoba
Saskatchewan	MAA
SK Airsoft	Ontario
PDW	Airsoft Ottawa
South Sask Mercs	Snow Dragons
Quebec	1st Ranger Platoon
PQAC	Wolfpack Tactical
1st Pathfinders Regiment	TTAC3
Quebec Airsoft
MTX Airsoft	Atlantic
FAQc	Atlantic Airsoft

April 5th, 2009, 20:30	#61
AngelusNex formerly Sepulcrum Trader rating Join Date: May 2007 Location: Kingston,ON, aka Funkasia	mechbox and cylinder are a clear strong feeling plastic. The gears seem to be made or the same stuff as TM pistons, same with the piston. I wouldn't be surprised if we cracked it open and found out that all the plastic evolved into something stronger than diamond. Last edited by AngelusNex; April 5th, 2009 at 20:35..

April 6th, 2009, 00:39	#64
Crunchmeister Trader rating Join Date: Nov 2007 Location: In your bedroom going though your underwear drawer	Probably not. Next game, whenever that is... __________________

April 6th, 2009, 00:49	#66
Crunchmeister Trader rating Join Date: Nov 2007 Location: In your bedroom going though your underwear drawer	Oh, one of will. You can be sure of that! __________________

April 6th, 2009, 01:00	#70
sushi_boy604 Trader rating Join Date: Jun 2008 Location: British Columbia	Man a lipo battery almost killed my TM MP5. How the hell can that not break! haha nice work guys.

April 6th, 2009, 01:17	#71
aZn_triXta07 Trader rating Join Date: Nov 2005 Location: Toronto, Ontario	This just comes to show you that even SHITSOFT can make a stand. If the externals aren't too bad you think it'd be worth dumping a new V6 mechbox in it or something?

April 6th, 2009, 01:24	#72
Strelok Trader rating Join Date: Jun 2006 Location: Brandon Manitoba	http://www.youtube.com/watch?v=Z4Tyv...eature=related Might be a repost, but it looks like killbucket ran a test on the AFTERMATH Broxa in a simular manner. While it is all metal gears and stuff, a lot of people tend to considor it a shit gun. Looks like its holding up well to me! (This video was taken after he had done a one and a half minute run with it, the battery died on him before, lol.) ________ Website Host Last edited by Strelok; April 11th, 2011 at 12:28..

VIDEO: Plastic mechbox Firepower P90 running on an 11.1V li-po battery

Airsoft Media