Aftermath Kraken AK47 AEG

kalnaren · February 15th, 2009, 18:33

End point is, they throw in whatever spring they have lieing around that day and the only really sure way to see what it is shooting at is to chronie it.

chompizikstan · February 15th, 2009, 19:10

Although I have the one with the black hop up and after 25k rounds it chronos 380fps

yuhaoyang · March 2nd, 2009, 01:49

Review of newer Kraken that comes in paper box- differences: It comes in a paper box! Yay! The screw threads on the half metal half plastic buttplate are plastic, and strip extremely easily, I've super super glued, then JB welded it together. I've reshimed, relubed, and replaced the sector gear with a TM one, and now it is actually very quiet, the spring is rediculous, and would probably push the gun to something like 420fps if it were not for the fact that nothing seals properly. (piston and cylinder head, nozzle) the hop-up rubber works fine, I get the same accuracy as any other stock AK pretty much. If you don't relube it out of the box, well, I saw some pretty funky green stuff flow out of the gaps of the box in about a week of basement plinking. During a game it was... Well I didn't fancy running around with a crappy looking clearsoft gun, but it worked fine, shot fine, and with the new shims and lube, was light on battery consumption, instead of the grinding noise and a hot battery after 1 mag when I just got it. By the way, it chronoed 380 in the middle of winter. The piston head pad has been glued on with magic or something, if you want to put a sorbo pad in, hats off to you, I gave up after stabbing myself twice in the finger. The plastic body has already cracked in various places, especially around the screw holes. If you are purely looking for performance... Well, might as well gamble with this one, you might get a lemon, but you might not. In the end, for around $160 ish, it's pretty fairly priced. (Also it's 18 guage wire)

Grumpy · March 25th, 2009, 11:21

How do you mount a scope on a Kraken AK47? I don't see any rails to mont on. I am looking at buying one of these from cabellas as well, but I am caught between this and the Aftermath Lycaon (MP5)...they both look like good performers.

Quote:

Originally Posted by connormurphy

i have the kraken aftermath AK-47 too, I gotta say I love the gun i have the black skin for mine tho. It it an amazing gun good fps fast shooting speed and also. I highly recommend this gun. I just recently purchased 10 new mid capacity mags because i find hi-cap make too much noise when moving. I am still waiting for them to get here but cant wait for them to get here. I ordered them or ehobbyaisa which has great prices! On my AK I have a tasco 30x red dot scope, i went to walmart and bought it for 50$ it works great!

Kingsix · March 28th, 2009, 01:58

buy a scope mount for an AK
Furniture with Rails
or do what the Insurgents do and duct tape it.

EDWARD I. MAIDEN · March 28th, 2009, 02:26

HEY all, I thought that the KRAKEN sold at Cabela's was made by firepower not aftermath..hence the differance..I just got off of their site and it said 300fps with.12.and a 400 rnd. mag..where as the aftermath is 370 to 380 fps with.20 and a 470 mag...the catalogue they sent me even said firepower beside the KRAKEN..I don't know but the weapon definately does not look the same as my aftermath KRAKEN..more clear part's on the firepower..just my observation..maybe a misprint on they're end..anyway make the best with what you have.. or can afford..beside's I'm sure we all started out with low end weapon's..even though my aftermath KRAKEN still freakin' rocks!

Grumpy · April 7th, 2009, 18:47

Does anyone happen to have a screen cap of the Cabelas.ca site where the Kraken AK-47 was listed @ $119. They have stock again and now the price is $179.99. They are flatout denying that they have ever listed it @ $119...what a bunch of turds, I should have ordered it when it was on backorder @ $119.00.

airsoft newbie · June 7th, 2009, 21:14

how do you pull out the butt of the gun? in the manual it says to pull down but it doesnt work, and i even tried unscrewing the butt and all i got was a plastic cover underneath.

yuhaoyang · June 7th, 2009, 21:28

push it down firmly

airsoft newbie · June 16th, 2009, 21:31

well, i just fielded my kraken last weekend with .20 and .25 and it owned. my friends were scared of it, and the whole other team were aiming for me because of the high rate of fire (750 to 850 a minute it says on the package) they couldn't move. it has nice speed on it, and it shot accurately for quite a long distance. I am very satisfied so far with this gun. If you are looking at buying it, I would suggest going to: velocityarms.ca
and getting the "Crazy Aftermath Kraken Package", it comes with 2000 .20 and 2000 .25, as well as 3 metal 600 round mags.

kalnaren · June 16th, 2009, 21:38

You must have been playing against people with shitty guns.

spaceman13 · June 16th, 2009, 21:53

Quote:

Originally Posted by airsoft newbie

well, i just fielded my kraken last weekend with .20 and .25 and it owned. my friends were scared of it, and the whole other team were aiming for me because of the high rate of fire (750 to 850 a minute it says on the package) they couldn't move. it has nice speed on it, and it shot accurately for quite a long distance. I am very satisfied so far with this gun. If you are looking at buying it, I would suggest going to: velocityarms.ca
and getting the "Crazy Aftermath Kraken Package", it comes with 2000 .20 and 2000 .25, as well as 3 metal 600 round mags.

not really impressive.

Sasha · June 17th, 2009, 15:21

Quote:

Originally Posted by kalnaren

You must have been playing against people with shitty guns.

The Kraken actually works about as well as anything I've ever come up against (the best being probably CAs), it just looks silly and makes a rather high piched noise when you shoot. But if you're a decent player, it's really all you need.

Until it brakes.

But then you just swap in some TM parts.

kalnaren · June 17th, 2009, 19:32

Quote:

Originally Posted by Sasha

The Kraken actually works about as well as anything I've ever come up against (the best being probably CAs), it just looks silly and makes a rather high piched noise when you shoot. But if you're a decent player, it's really all you need.

Until it brakes.

But then you just swap in some TM parts.

Well, like I always say.. the player makes the gun, not the other way around.

sixb0nes · June 19th, 2009, 14:44

Picked one up for my starter gun and love it so far! Threw some Krylon on it for good measure.

From one newbie to another, here's a tip for taking off the orange tip! Remove the fake cleaning rod by pulling it down and out and unscrew the front sight. Put the sight with the orange tip under HOT running tap water for a minute or two, turning it every so often. Believe me when I say this thing is ON GOOD, and the hot water softens it just enough to make it possible to twist off with a set of pliers or grips.

Home	Forums	Register	Gallery	FAQ	Calendar
Retailers	Community	News/Info	International Retailers	IRC	Today's Posts

British Columbia	Alberta
BCAC	EAR
Op-For	JOC
Northern Arms Airsoft	Skunkworx Airsoft
Airsoft Kelowna	RAAT
Prince George Airsoft	Manitoba
Saskatchewan	MAA
SK Airsoft	Ontario
PDW	Airsoft Ottawa
South Sask Mercs	Snow Dragons
Quebec	1st Ranger Platoon
PQAC	Wolfpack Tactical
1st Pathfinders Regiment	TTAC3
Quebec Airsoft
MTX Airsoft	Atlantic
FAQc	Atlantic Airsoft

March 28th, 2009, 01:58	#365
Kingsix Trader rating Join Date: Apr 2008 Location: Peoples Republic of Toronto	buy a scope mount for an AK Furniture with Rails or do what the Insurgents do and duct tape it. __________________

March 28th, 2009, 02:26	#366
EDWARD I. MAIDEN Trader rating Join Date: Aug 2008 Location: THIRD ROCK FROM THE SUN..FOR NOW..TILL' MY RIDE SHOW'S UP...	HEY all, I thought that the KRAKEN sold at Cabela's was made by firepower not aftermath..hence the differance..I just got off of their site and it said 300fps with.12.and a 400 rnd. mag..where as the aftermath is 370 to 380 fps with.20 and a 470 mag...the catalogue they sent me even said firepower beside the KRAKEN..I don't know but the weapon definately does not look the same as my aftermath KRAKEN..more clear part's on the firepower..just my observation..maybe a misprint on they're end..anyway make the best with what you have.. or can afford..beside's I'm sure we all started out with low end weapon's..even though my aftermath KRAKEN still freakin' rocks! __________________ "Woe to you, Oh Earth and Sea,for the Devil sends the Beast with wrath,because he knows the time is short...Let him who hath understanding reckon the number of the Beast for it is a human number, its number is Six Hundred and Sixty-six."(Revelations Ch.x111 v18) Last edited by EDWARD I. MAIDEN; March 28th, 2009 at 02:34..

February 15th, 2009, 19:10	#362
chompizikstan Trader rating Join Date: Sep 2008 Location: Connecticut, US	Although I have the one with the black hop up and after 25k rounds it chronos 380fps

March 2nd, 2009, 01:49	#363
yuhaoyang asexual lumbricus terrestris Trader rating Join Date: Jan 2009 Location: Edmonton west	Review of newer Kraken that comes in paper box- differences: It comes in a paper box! Yay! The screw threads on the half metal half plastic buttplate are plastic, and strip extremely easily, I've super super glued, then JB welded it together. I've reshimed, relubed, and replaced the sector gear with a TM one, and now it is actually very quiet, the spring is rediculous, and would probably push the gun to something like 420fps if it were not for the fact that nothing seals properly. (piston and cylinder head, nozzle) the hop-up rubber works fine, I get the same accuracy as any other stock AK pretty much. If you don't relube it out of the box, well, I saw some pretty funky green stuff flow out of the gaps of the box in about a week of basement plinking. During a game it was... Well I didn't fancy running around with a crappy looking clearsoft gun, but it worked fine, shot fine, and with the new shims and lube, was light on battery consumption, instead of the grinding noise and a hot battery after 1 mag when I just got it. By the way, it chronoed 380 in the middle of winter. The piston head pad has been glued on with magic or something, if you want to put a sorbo pad in, hats off to you, I gave up after stabbing myself twice in the finger. The plastic body has already cracked in various places, especially around the screw holes. If you are purely looking for performance... Well, might as well gamble with this one, you might get a lemon, but you might not. In the end, for around $160 ish, it's pretty fairly priced. (Also it's 18 guage wire)

April 7th, 2009, 18:47	#367
Grumpy Trader rating Join Date: Dec 2006 Location: Orleans, ON	Does anyone happen to have a screen cap of the Cabelas.ca site where the Kraken AK-47 was listed @ $119. They have stock again and now the price is $179.99. They are flatout denying that they have ever listed it @ $119...what a bunch of turds, I should have ordered it when it was on backorder @ $119.00.

June 7th, 2009, 21:14	#368
airsoft newbie Trader rating Join Date: Nov 2008	how do you pull out the butt of the gun? in the manual it says to pull down but it doesnt work, and i even tried unscrewing the butt and all i got was a plastic cover underneath.

June 16th, 2009, 21:31	#370
airsoft newbie Trader rating Join Date: Nov 2008	well, i just fielded my kraken last weekend with .20 and .25 and it owned. my friends were scared of it, and the whole other team were aiming for me because of the high rate of fire (750 to 850 a minute it says on the package) they couldn't move. it has nice speed on it, and it shot accurately for quite a long distance. I am very satisfied so far with this gun. If you are looking at buying it, I would suggest going to: velocityarms.ca and getting the "Crazy Aftermath Kraken Package", it comes with 2000 .20 and 2000 .25, as well as 3 metal 600 round mags.

June 19th, 2009, 14:44	#375
sixb0nes Trader rating Join Date: May 2009	Picked one up for my starter gun and love it so far! Threw some Krylon on it for good measure. From one newbie to another, here's a tip for taking off the orange tip! Remove the fake cleaning rod by pulling it down and out and unscrew the front sight. Put the sight with the orange tip under HOT running tap water for a minute or two, turning it every so often. Believe me when I say this thing is ON GOOD, and the hot water softens it just enough to make it possible to twist off with a set of pliers or grips.

Aftermath Kraken AK47 AEG

Reviews