AGM M14 Dissassemble?

Double Tapper · August 4th, 2008, 10:04

No one?

Double Tapper · August 14th, 2008, 20:13

Well,I braved this box apart.Looks like that when the anti reversing latch
was not attached,and that when the gears reverse and the trigger is pulled,
not a pretty picture.Only the gear that pulls the piston back was stripped.
Are all gears a standard size?,I can just order three gears and the fit?.
Second question is.is there some kind of disconnect for semi,I think a part
is missing,no nothing flew out while I took it apart.

Double Tapper · August 28th, 2008, 17:56

I can close this thread with good news.My parts arrived today,so
I was able to reassemble my mechhbox with only one small hiccup.
I ordered a TM replacement gear set figuring they would drop right
in and fit.Nope,the spur gear was 3/16th of an inch off on both
side and wouldn't reach the bevel or half gear.My only choice was
to reuse the old spur gear which I can find no damage or wear on.
I timed the gears,grease everything in sight attached the motor
and tadda!,it work great.I reassembled the entire gun and tested
it in all modes,it worked again,now I loaded a mag and have only
tested in semi and auto and it fired perfect.All those multi feed
rounds problems are gone.Man am I sooooo happy.

Double Tapper · October 19th, 2008, 20:17

Well,I was testing my agm prior to disassembly,I fired some rounds at a target
and it was firing in auto in the semi position,these are brand new parts,what
gives?.I have only fired five hi caps through this gun,and I did not abuse it.
These are new TM parts with lots of grease,anyone have a idea why this may
be?.Looks like I am back at the beginning again where I started with this gun.

Double Tapper · October 22nd, 2008, 17:50

Has no one had a problem when replacing a semi auto disconnect,
that after a few hi caps it doesn't work.These are TM replacement
parts,so I thought I would be good for a whole at least.There is
plenty of grease in the works to lube everything,so that is not the
problem that I can see.Anyone have any ideas?.

The Saint · October 22nd, 2008, 23:08

Geez, I didn't even see this thread until now. I've dealt with version 7 clone before, they can be a handful. I'd have to see it to really know what's wrong.

Double Tapper · October 26th, 2008, 11:36

I'll be taking it apart today and see what is going on,if I can't figure it
out,I let you know.But if can tell me of the other problems you had,I can
look for those while I have it apart.Thanks

Home	Forums	Register	Gallery	FAQ	Calendar
Retailers	Community	News/Info	International Retailers	IRC	Today's Posts

British Columbia	Alberta
BCAC	EAR
Op-For	JOC
Northern Arms Airsoft	Skunkworx Airsoft
Airsoft Kelowna	RAAT
Prince George Airsoft	Manitoba
Saskatchewan	MAA
SK Airsoft	Ontario
PDW	Airsoft Ottawa
South Sask Mercs	Snow Dragons
Quebec	1st Ranger Platoon
PQAC	Wolfpack Tactical
1st Pathfinders Regiment	TTAC3
Quebec Airsoft
MTX Airsoft	Atlantic
FAQc	Atlantic Airsoft

October 19th, 2008, 20:17	#19
Double Tapper Trader rating Join Date: Jul 2006 Location: The land of the over regulated and the banners	Spoke too soon! Well,I was testing my agm prior to disassembly,I fired some rounds at a target and it was firing in auto in the semi position,these are brand new parts,what gives?.I have only fired five hi caps through this gun,and I did not abuse it. These are new TM parts with lots of grease,anyone have a idea why this may be?.Looks like I am back at the beginning again where I started with this gun. __________________

October 22nd, 2008, 17:50	#20
Double Tapper Trader rating Join Date: Jul 2006 Location: The land of the over regulated and the banners	Has no one had a problem when replacing a semi auto disconnect, that after a few hi caps it doesn't work.These are TM replacement parts,so I thought I would be good for a whole at least.There is plenty of grease in the works to lube everything,so that is not the problem that I can see.Anyone have any ideas?. __________________

October 22nd, 2008, 23:08	#21
The Saint Trader rating Join Date: Jan 2005 Location: Quebec	Geez, I didn't even see this thread until now. I've dealt with version 7 clone before, they can be a handful. I'd have to see it to really know what's wrong. __________________ "The Bird of Hermes is My Name, Eating My Wings to Make Me Tame."

August 4th, 2008, 10:04	#16
Double Tapper Trader rating Join Date: Jul 2006 Location: The land of the over regulated and the banners	No one?

August 14th, 2008, 20:13	#17
Double Tapper Trader rating Join Date: Jul 2006 Location: The land of the over regulated and the banners	Well,I braved this box apart.Looks like that when the anti reversing latch was not attached,and that when the gears reverse and the trigger is pulled, not a pretty picture.Only the gear that pulls the piston back was stripped. Are all gears a standard size?,I can just order three gears and the fit?. Second question is.is there some kind of disconnect for semi,I think a part is missing,no nothing flew out while I took it apart.

August 28th, 2008, 17:56	#18
Double Tapper Trader rating Join Date: Jul 2006 Location: The land of the over regulated and the banners	I can close this thread with good news.My parts arrived today,so I was able to reassemble my mechhbox with only one small hiccup. I ordered a TM replacement gear set figuring they would drop right in and fit.Nope,the spur gear was 3/16th of an inch off on both side and wouldn't reach the bevel or half gear.My only choice was to reuse the old spur gear which I can find no damage or wear on. I timed the gears,grease everything in sight attached the motor and tadda!,it work great.I reassembled the entire gun and tested it in all modes,it worked again,now I loaded a mag and have only tested in semi and auto and it fired perfect.All those multi feed rounds problems are gone.Man am I sooooo happy.

October 26th, 2008, 11:36	#22
Double Tapper Trader rating Join Date: Jul 2006 Location: The land of the over regulated and the banners	I'll be taking it apart today and see what is going on,if I can't figure it out,I let you know.But if can tell me of the other problems you had,I can look for those while I have it apart.Thanks __________________

AGM M14 Dissassemble?

Airsoft Guns Discussion