|
|
|
|
|
||||||||
|
|
|||||||||
| Home | Forums | Register | Gallery | FAQ | Calendar |
| Retailers | Community | News/Info | International Retailers | IRC | Today's Posts |
 |
|
|
Thread Tools |
May 25th, 2009, 21:23
|
#1 | ||
|
asexual lumbricus terrestris
|
Warning-modify smooth modular gearset
I just got my high speed modular gearset today, put it into my G&P mechbox, put in a modify tappet plate, and closed the mechbox, then the motor wouldn't turn it. After poking around a bit, I realized it was the tappet plate that was jammed against the gear or something else that wouldn't make it turn. The same tappet plate moved fine with XYT gears. I then swapped in a G&P tappet, and the same problem occured, although the tappet could move back and forth very slowly this time, the gears still wouldn't turn. Finally, I put in a DBoys tappet, and after shooting off a few rounds, it now works fine. However it still sounds worse than my shimming on the XYT gears, although that's probably because my shimming set the gears too far apart.
__________________
Quote:
Quote:
|
||
|
|
|
May 25th, 2009, 21:26
|
#2 |
|
A-56 aka Mr.Hitman
|
Um, Modify works best with Modify parts.
Try sticking to one brand. |
|
|
|
|
May 25th, 2009, 21:28
|
#3 |
|
Wait.. you shimmed modify gears?
Please tell me you bought the loose gears instead of the cage... |
|
|
|
|
May 25th, 2009, 21:30
|
#4 | |
|
A-56 aka Mr.Hitman
|
Quote:
|
|
|
|
|
|
May 25th, 2009, 21:34
|
#5 | ||
|
asexual lumbricus terrestris
|
I was talking about XYT gears that I shimmed lol. I got the SMOOTH set, with one bracket. And the modify tappet plate constricted the movement the most, the G&P one was actually slightly better, the nozzle moved back and forth instead of it not being able to move at all with the modify tappet. How would I have been able to put shims on a modular gearset??
__________________
Quote:
Quote:
|
||
|
|
|
|
May 25th, 2009, 21:42
|
#6 | |
|
formerly Sepulcrum
|
Quote:
Just shave down a little from the width of the part of the tappet plate that is jamming. |
|
|
|
|
|
May 25th, 2009, 21:51
|
#7 | ||
|
asexual lumbricus terrestris
|
doing that right now XD
I'm dissapointed that no expensive airsoft thing that I bought has ever worked perfectly... not even when I got that pretty much new TM 5.1 EDIT: yikes, the DBoys winglet profile tapers to a much narrower point...
__________________
Quote:
Quote:
Last edited by yuhaoyang; May 25th, 2009 at 23:00.. |
||
|
|
|
 |
|
||||||
| Bookmarks |
| Thread Tools | |
|
|
 |
|
