G36 Hop-Up problems

[Turd]

Ok so last time i went out bb's were spitting out about 10 feet out of my barrel, at first i thought it was some sort of air seal issue but after taking apart my G36 ive noticed a bb quite harshly lodged in the hop-up. any thoughts or suggestions as to what has happened? also, when looking at the side of the cylinder, if i can see into it from the side to the other that would imply the spring is compressed? if so im assuming thats bad lol.

UPDATE: Well after taking a closer inspection i realized that the whole inner barrel is full of bb's, there has been a G36K outer barrel kit installed (that is actually too big for the threads on the gun) so ill take that off and see if that changes things

[dpvu]

The spring being compressed would be a pretty bad thing. Just hook up your battery (make sure it's charged) and cycle it a few times. That will decompress your spring and should be done before storing your AEG.

Your hopup/BB jam issue could be related to the hopup being turned up too high or the nub not being in properly. It's a little weird to have your inner barrel filled with BBs though and the outer barrel really shouldn't have anything to do with it.

[Turd]

Originally Posted by dpvu

The spring being compressed would be a pretty bad thing. Just hook up your battery (make sure it's charged) and cycle it a few times. That will decompress your spring and should be done before storing your AEG.

Your hopup/BB jam issue could be related to the hopup being turned up too high or the nub not being in properly. It's a little weird to have your inner barrel filled with BBs though and the outer barrel really shouldn't have anything to do with it.

I tried tipping the gun down to let the bb's fall out but they didnt until i took off the barrel extension so that at least played a part in the problem, ill do some test firing tomorrow