|
|||||||||
|
Home | Forums | Register | Gallery | FAQ | Calendar |
Retailers | Community | News/Info | International Retailers | IRC | Today's Posts |
|
Thread Tools |
November 5th, 2007, 20:29 | #1 |
JingGong m4a1 loose stock
Can anyone help me fix this problem? It my first airsoft gun and I only used it once. The stock seems to pull out abit. Heres a picture.
Thanks |
|
November 5th, 2007, 20:33 | #2 |
Pull down on the vertical tube bit on the bottom left hand side of the picture, and pull the stock off. That should give you access to the stock tube. You may need to remove the cover, and then get a long screwdriver and tighten up the long screw inside.
Last edited by Styrak; November 5th, 2007 at 22:41.. |
|
November 5th, 2007, 22:01 | #3 |
thanks
|
|
November 5th, 2007, 22:40 | #4 |
Did it work?
|
|
November 6th, 2007, 01:09 | #5 |
ya it was pretty simple. thanks
|
|
|
Bookmarks |
Thread Tools | |
|
|