PSG1 Barrel Question

[DarkAngel]

Im curious if a PSG1 uses the same barrel threading as an M4 Outer Barrel.
Cause if so, one of these badboys would look GREAT on my C8/LMG

[Cushak]

There's no threading (that I can see) on the barrel of my PSG-1

[TokyoSeven]

I think AquaMarine has something similar to that, his psg1 has some sorta barret m95 flashly mcdealy on it. I dont know how he set his up though.

[DarkAngel]

there must be a way to equip a silencer on a psg1 XD
if its still 14mm, i could use a tap set and put in a thread

[ILLusion]

Originally Posted by DarkAngel

Im curious if a PSG1 uses the same barrel threading as an M4 Outer Barrel.
Cause if so, one of these badboys would look GREAT on my C8/LMG

That flash hider doesn't thread on. It clamps on. As long as your outer barrel diameter is the same as a PSG-1, then you can clamp it on.

It just slips over and a set screw secures it.

[DarkAngel]

so would the outer barrel of an M4 be the same diameter of a PSG1?

[Brazenhead]

Probobly not.

[Kos-Mos]

get a good machinist to make you an adapter...

and yes you can use a silencer adapter made for one of the ASP2 serie to fit the PSG1... same tread... just can't remember witch one.

[DarkAngel]

Alright, thanx

[Aquamarine]

It has already been said, but I have the version made by G&P. It slips overtop of the end of the PSG-1 barrel like a really short condom made of aluminum with venting ports.... hrmmm... well anyhow, as it was said, a single TEEEEENSY screw holds it in place so your M4 barrel will need to be the same diameter.