|
|||||||||
|
Home | Forums | Register | Gallery | FAQ | Calendar |
Retailers | Community | News/Info | International Retailers | IRC | Today's Posts |
|
Thread Tools |
April 22nd, 2007, 16:01 | #1 |
mis feeding problem on M15A4
I've checked my nozzle, tappet plate and everything else in my AEG... also tried different magazines. I'm not really sure why is it always misfeeds whenever I go on fullly-auto mode. On semi-auto.. it's fine.
What it makes me more confused.. i never did any mods.. i just re-opend my gearbox and re-lube the gears. I'm not really sure if the ROF increased though. ...and one more question.. My friend's M4 also misfeeds.. what he always do is to put a folded paper in front of the magazine to make it tight to the lower receiver... I'm a bit intrigued it because i thought most M4/M16 magazines are universal and fit all. I don't think there're any lose screws on his AEG.
__________________
MORE FPS :banghead: |
|
April 22nd, 2007, 20:45 | #2 |
My CA15A4 had misfeeding problems too. It turns out it was due to weak magazine springs.
The CA mags have quite a bit of rattle in the M15. I bought a truckload of STAR mags and they fit nice and tight and don't misfeed at all. Shoots every last BB out of the magazine. CA M4s apparently have alot of misfeeding issues... something reviews of the gun rarely mention. I'd take it to a gun smith or wait for more opinons. Zi-Xiao
__________________
Primary - CA M249 - Systema PTW Sidearms - KWA G18c - WE 1911 |
|
|
Bookmarks |
Thread Tools | |
|
|