|
|
|
|
|
||||||||
|
|
|||||||||
| Home | Forums | Register | Gallery | FAQ | Calendar |
| Retailers | Community | News/Info | International Retailers | IRC | Today's Posts |
 |
|
|
Thread Tools |
January 5th, 2007, 00:48
|
#1 |
|
Crane stock battery wires
Hello,
I have been looking around and cant seem to find the length of wires needed for the crane stock battery. Im changing my nunchuck batteries into a crane stock battery so I dont need to carry my PEQ unit anymore. I was wondering if anyone knows how many and how long of wires I need. Thanks again |
|
|
|
|
January 5th, 2007, 00:50
|
#2 |
|
on the battery or from the mechbox?
|
|
|
|
|
|
January 5th, 2007, 00:52
|
#3 |
|
on the battery, humm from the mechbox might help to
cause i rewired it myself it seems like theres a little to much wire in it, it sticks about 2/3 cms out of the buffer tube |
|
|
|
|
|
January 5th, 2007, 00:53
|
#4 |
|
from the mechbox i found that abou 7 3/4 - 8 inches works good, dont go to short though, you have to enuff for it to just barly stick out of the buffer tube. for the battery, dont go to long, about inch or 2 past the top battery will be fine
Last edited by hymnforthewretched; January 5th, 2007 at 00:55.. |
|
|
|
|
|
January 5th, 2007, 00:54
|
#5 |
|
sorry i should say that, those lengths are WITH connectors
|
|
|
|
|
|
January 5th, 2007, 00:57
|
#6 |
|
So for the battery
 From the top one to the bottom one is 2inch and 2inches as well from the top to center and bottom to center? |
|
|
|
|
 |
|
||||||
| Bookmarks |
| Thread Tools | |
|
|
 |
|
