|
|
|
|
|
||||||||
|
|
|||||||||
| Home | Forums | Register | Gallery | FAQ | Calendar |
| Retailers | Community | News/Info | International Retailers | IRC | Today's Posts |
 |
|
|
Thread Tools |
December 23rd, 2006, 22:45
|
#1 |
|
Star L85a2 Disassembly Guide with Internal Review...
I created this disassembly guide/ review and wanted to share it here as well. I initially posted it on Arnie's so I will just post that link in order to conserve space from all the pics. Plus, a lot of you guys here are member's on Arnie's anyway. Anyway.... http://www.arniesairsoft.co.uk/forum...howtopic=91735 .
|
|
|
|
|
December 23rd, 2006, 22:49
|
#2 |
|
Official ASC Inker
|
turns out you need to log into that site to view your review
__________________
 In Toronto and want a rad tattoo? PM me |
|
|
|
|
December 24th, 2006, 14:02
|
#3 |
|
Here's a link to AirsoftMechanics where I've posted the same guide. I don't believe you need a log on there.
http://airsoftmechanics.com/phpBB/viewtopic.php?t=459 |
|
|
|
|
|
December 24th, 2006, 14:11
|
#4 |
|
Damn its stock running an 11.1v Lipo. THat is nutz. Not much for wear either.
__________________
No Comment. |
|
|
|
|
December 27th, 2006, 15:17
|
#5 |
|
Only about 5000 rds so far but I thought the internals were in excellent shape given the high ROF. The exploded bearing on the one side of the bevel gear was probably caused by the stress of the spring and higher RPM. A player on Arnies advised that the ball bearings on the bevel gear come that way stock from the factory. I thought that was interesting and was not aware of that. This marks the second time (2 for 2) that I've had a bearing explode so take that for what's its worth. I'm staying away forever.
|
|
|
|
|
 |
|
||||||
| Bookmarks |
| Thread Tools | |
|
|
 |
|
