|
|
|
|
|
||||||||
|
|
|||||||||
| Home | Forums | Register | Gallery | FAQ | Calendar |
| Retailers | Community | News/Info | International Retailers | IRC | Today's Posts |
 |
|
|
Thread Tools |
December 12th, 2006, 04:03
|
#1 |
|
TM M4A1, identify this piece (Not sure where it goes)
When I took apart and reassembled my M4, I found this piece on my desk. I am unsure of where it goes or if its important. If anyone has any idea what it is or where it goes it'll be a lot of help.
Its a small donut like ring with 3 prongs pointing towards the center, I attached a picture of it below. Thanks again |
|
|
|
|
December 12th, 2006, 04:06
|
#2 |
|
Scotty aka harleyb
|
Holds the hopup gears on. Check your hopup unit.
__________________
|
|
|
|
|
December 12th, 2006, 04:11
|
#3 |
|
Humm it seems like i already have one there? Anywhere else this fits in?
|
|
|
|
|
|
December 12th, 2006, 04:15
|
#4 |
|
Scotty aka harleyb
|
Take it out and check the other side, it's probably from the pivot pin.
__________________
|
|
|
|
|
December 12th, 2006, 04:22
|
#5 |
|
This part right here??
Thanks for all your help harleyB |
|
|
|
|
|
December 12th, 2006, 04:26
|
#6 |
|
Scotty aka harleyb
|
No, it's for the other one, just to the left in the picture. Sorry, I guess pivot pin was the wrong term. I'm tired, sue me =P
__________________
|
|
|
|
|
December 12th, 2006, 04:27
|
#7 |
|
haha
I got it thanks for all your help  appreicate it I hate not knowing where a part goes  first time taking apart my m4
|
|
|
|
|
|
December 12th, 2006, 04:28
|
#8 |
|
Scotty aka harleyb
|
Don't sweat it.
__________________
|
|
|
|
|
December 12th, 2006, 10:23
|
#9 | |
|
guys are quick here and help out lots. just be glad it was not the spring for the tappet plate. or and other small spring in that case.
__________________
    Quote:
|
|
|
|
|
 |
|
||||||
| Bookmarks |
| Thread Tools | |
|
|
 |
|
