Ready Mag, doing my home work

[TH_CYRUS50]

Good day Gents/Ladies.

This is a question for the M4/M15/16 owners among us.

I am thinking of buying the ready mag and use it as an extra mag holder.

But i cant seem to find picture's of how its mounted on the replica.
YES you can find them but not what i want to see, you see only the Ready mag.

What i want to see is how its mounted on the magwel, can it be mounted left and right or only left or right??
So if some body has picture's of his M4,15,16 whith picture's of both side of his replica that would be great.
Another question is, how do you release the magazine that's stored in the ready mag??

Before flaming, i did use the search button but the needed result is not there.

Thanks a lot.

-Cyrus

[GraveTech]

I would assume you can't do it because of the ejection port on the right side... so left only?

[Whozat]

Left side only, wraps around the magwell with a release "button" that lines up with the mag release on the reciever. Just so you know, when you use the mag release, both mags come out at the same time. The object is that you hold the fresh mag and let the spent one drop to the ground. This isn't the most practical thing in airsoft as you'll end up spending half of your time looking for the mag that dropped on the ground.
Perhaps check out mag clamps.

[Whozat]

Here's a pic to show you how it looks on a rifle.

[TH_CYRUS50]

Okay, nice this is what i need to know.
Is there somebody that can take a picture of the clamp that mounts on the magwell.

About the mag dropping thing, that aint such a big problem in my opinion.
On the last skirm i used about 15 Hi-caps(damn cheaters) and every time i was loading i had to back-up because my mags are empty and i couldnt reach fast enough to my other mag.

Thanks for the info lads.

-Cy

just like the pic shows, its grey-ish, not black

[TH_CYRUS50]

The collor aint a problem.

-Cy