Airsoft Canada
https://www.replicaairguns.ca/airsoft

Go Back   Airsoft Canada > Discussion > Accessories Discussion
Home Forums Register Gallery FAQ Calendar
Retailers Community News/Info International Retailers IRC Today's Posts

Having trouble with gas...

:

Accessories Discussion

Reply
 
Thread Tools
Old October 8th, 2006, 22:36   #1
FenrirKar
 
Join Date: Sep 2006
Location: Ontario
Having trouble with gas...

No pun intended, of course. More specificly, I've having an issue with my KWA Glock 18c when using Green gas. I've looked up a number of 'guides' on how to use gas operated pistols, but none are helping. The problem is that when I fill it up (3 seconds tops, I've been told), I can only get two or three shots off before the gas runs out. There are no leaks, and the hop-up seems to be just fine. Does anyone have any advise for me? Thanks in advance.
FenrirKar is offline   Reply With Quote
Old October 8th, 2006, 22:52   #2
Kuraitenshi
 
Kuraitenshi's Avatar
 
Join Date: Jul 2006
Location: NewWestminster
Send a message via MSN to Kuraitenshi
your probably not filling it enough. I give a six count for the tm 4.3 and a 9 count for the M11 which has a similar clip size. I haven't used a G18 before, but at aprox 6 seconds of fill time for the M11 it gives enuff gass for a clip an a bit.
__________________
I AM LOST!! join me... http://www.lost.eu/3a30b
I am worth $2,064,160 on http://www.HumanForSale.com

Kuraitenshi is offline   Reply With Quote
Old October 8th, 2006, 22:59   #3
Hades
 
Hades's Avatar
 
Join Date: Jan 2005
Location: Home
Send a message via MSN to Hades
Fill it up until the gas starts to spray out of the fill nozzle, then you know the mag is full
Hades is offline   Reply With Quote
Old October 8th, 2006, 23:10   #4
FenrirKar
 
Join Date: Sep 2006
Location: Ontario
Well, I filled it up for six seconds, and still only managed to get two shots off. By the way, is it normal for the green gas nozzle to make a psssst sound while filling? This is my first gas gun, in case you couldn't tell, so I'm curious to know. Thanks for the suggestions thus far though.
FenrirKar is offline   Reply With Quote
Old October 8th, 2006, 23:21   #5
Kuraitenshi
 
Kuraitenshi's Avatar
 
Join Date: Jul 2006
Location: NewWestminster
Send a message via MSN to Kuraitenshi
The phishhhh ing sound you hear is the gas escaping into the air around you. Make sure you have the gas can inline with the mag If you don't have it alligned properly you will not get a good seal and your mag won't fill.


gas
gas
gas
i
mag
mag
mag

Good



.......gas
.....gas
...gas
.../
mag
mag
mag
Bad
__________________
I AM LOST!! join me... http://www.lost.eu/3a30b
I am worth $2,064,160 on http://www.HumanForSale.com


Last edited by Kuraitenshi; October 8th, 2006 at 23:25..
Kuraitenshi is offline   Reply With Quote
Old October 8th, 2006, 23:33   #6
FenrirKar
 
Join Date: Sep 2006
Location: Ontario
Well, again, I'm afraid it won't work. I'm sure the gas can and tank are aligned properly, but the psst sound is still there, and only 3 shots are fired before there is a smaller psst sound in the gun, and it stops working.

Last edited by FenrirKar; October 8th, 2006 at 23:37..
FenrirKar is offline   Reply With Quote
Old October 8th, 2006, 23:59   #7
MadMax
Delierious Designer of Dastardly Detonations
 
MadMax's Avatar
 
Join Date: Dec 2001
Location: in the dark recesses of some metal chip filled machine shop
holding the mag and bottle upside down?
__________________
Want nearly free GBB gas?

MadMax is offline   Reply With Quote
Old October 9th, 2006, 00:06   #8
Pliskin
 
Pliskin's Avatar
 
Join Date: Jun 2006
Location: Renfrew, Ontario
Send a message via MSN to Pliskin
Quote:
Originally Posted by MadMax View Post
holding the mag and bottle upside down?
Like MadMax said, are you sure you're making the LIQUID gas go into the magazine? Make sure you're holding the can straight up and in alignment with the magazine.
__________________
Looking for an Age Verifier who passes through Renfrew area to contact me! PM me please!

Pliskin is offline   Reply With Quote
ReplyTop


Go Back   Airsoft Canada > Discussion > Accessories Discussion

Bookmarks

Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off


Airsoft Canada
https://www.replicaairguns.ca/airsoft

All times are GMT -4. The time now is 00:33.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.