|
|||||||||
|
Home | Forums | Register | Gallery | FAQ | Calendar |
Retailers | Community | News/Info | International Retailers | IRC | Today's Posts |
|
Thread Tools |
September 24th, 2006, 03:16 | #1 |
Possible LiPo replacement for MP7 battery?
http://www.b-p-p.com/proddetail.php?...b4cbb18115bd06
I've measured the pack used in the MP7 and it's approximately 89mm long (sans connector; cells only), 14mm wide, and 28mm tall. Most LiPo packs will fit the first two dimensions, but not the third. The above pack is the first exception I have found, at 25mm. I'd like to try it out as it gives a slight boost in both mA and voltage, though I don't like the fact it's only a 10C pack. I don't suppose anyone's put an ammeter on an MP7 yet? |
|
September 24th, 2006, 04:15 | #2 |
haven't stuck an ammeter on, but with my external lipo it has blown the stock 10A fuse
|
|
|
Bookmarks |
Thread Tools | |
|
|