Airsoft Plastic and Fiberglass

[Bearbait 37]

I See; Yeah definately a very nice looking rifle, I'm not one for trying to keep up with the "Jonses", so I went SIG, too bad that alot of the early parts need to be reinforced so much. The metal Hurricane Body does not apparently have the 3 burst setting on the side, so some guys have had to use a dremal to grind a bit..So i have Heard.
Not too many accessories either so If you want to make this one individual you have to really do alot of sketching and planning. I wonder why more companys alocate a billion parts for some guns and not for others. I hope you get your G36 model Xero.
In the mean time I will go about how too approach this fiberglass job and hopeefully when I get a Camera I can post those pics.........Bearbait

[Kuraitenshi]

good luck with that. :cheers:

[trufret]

I could but the demand would have to be high enough to make it worth while. a good mold would cost around $3000 to build and would have to be done after hours. I'd need something I could sell a few hundred a year and that would have a decnent profit margin to make it worth while.

[Bearbait 37]

Hey Trufret: Yeah I see your dilema on costs VS Demand, however if you go to most Surplus stores, you will find Minimi Box clips ( not at every location) just make the mag fit the drum securly so it wont drop off, That way the Box unit is readily available and you create the attachment....