M4 stock adapter for a TM MP5K-PDW?

VADER · September 11th, 2006, 18:45

Does anyone know where I can get an adapter to install a M4-style stock onto my TM MP5-PDW?

Thanks,

"Vader"

porry · September 11th, 2006, 20:42

you had to modify the rear plate on your mp5k to accept the m4 stock. Basically drilling a hole.

mcguyver · September 11th, 2006, 20:44

You don't need one. If you remove the 2 screws holding your folding stock onto the plate that mounts to the gun body, drill a hole in the center and use a long screw with a nut, it will work that way. Takes less than 15 minutes.

And if you decide to put the folding stock back on, it will still go back with no visible signs if the mod.

VADER · September 12th, 2006, 14:45

Thanks guys. I only have a real-steel AR15 tube to compare right now and it has an open-ended threaded "pipe" at the receiver end (as they screw directly into the receiver) and I thought I'd need a threaded "cap"/adapter that would screw onto the PDW's stock mounting plate. SO....I assume that the AIRSOFT M4 stock tubes have a SOLID end that I can drill holes thru? And will a large (sub-C) stick battery fit inside of the tube? (it will in the real steel). Please advise & thanks again for your help.

Home	Forums	Register	Gallery	FAQ	Calendar
Retailers	Community	News/Info	International Retailers	IRC	Today's Posts

British Columbia	Alberta
BCAC	EAR
Op-For	JOC
Northern Arms Airsoft	Skunkworx Airsoft
Airsoft Kelowna	RAAT
Prince George Airsoft	Manitoba
Saskatchewan	MAA
SK Airsoft	Ontario
PDW	Airsoft Ottawa
South Sask Mercs	Snow Dragons
Quebec	1st Ranger Platoon
PQAC	Wolfpack Tactical
1st Pathfinders Regiment	TTAC3
Quebec Airsoft
MTX Airsoft	Atlantic
FAQc	Atlantic Airsoft

September 11th, 2006, 18:45	#1
VADER Trader rating Join Date: Jan 2006 Location: in my own little world	M4 stock adapter for a TM MP5K-PDW? Does anyone know where I can get an adapter to install a M4-style stock onto my TM MP5-PDW? Thanks, "Vader"

September 11th, 2006, 20:44	#3
mcguyver Trader rating Join Date: Aug 2005 Location: Northern Alberta	You don't need one. If you remove the 2 screws holding your folding stock onto the plate that mounts to the gun body, drill a hole in the center and use a long screw with a nut, it will work that way. Takes less than 15 minutes. And if you decide to put the folding stock back on, it will still go back with no visible signs if the mod. __________________ Age verifier Northern Alberta Democracy is two wolves and a sheep discussing what's for dinner. Freedom is the wolves limping away while the sheep reloads. Never confuse freedom with democracy.

September 11th, 2006, 20:42	#2
porry Banned Trader rating Join Date: Mar 2004 Location: outside Edmonton	you had to modify the rear plate on your mp5k to accept the m4 stock. Basically drilling a hole.

September 12th, 2006, 14:45	#4
VADER Trader rating Join Date: Jan 2006 Location: in my own little world	Thanks guys. I only have a real-steel AR15 tube to compare right now and it has an open-ended threaded "pipe" at the receiver end (as they screw directly into the receiver) and I thought I'd need a threaded "cap"/adapter that would screw onto the PDW's stock mounting plate. SO....I assume that the AIRSOFT M4 stock tubes have a SOLID end that I can drill holes thru? And will a large (sub-C) stick battery fit inside of the tube? (it will in the real steel). Please advise & thanks again for your help.

M4 stock adapter for a TM MP5K-PDW?

Upgrades & Modifications