|
|||||||||
|
Home | Forums | Register | Gallery | FAQ | Calendar |
Retailers | Community | News/Info | International Retailers | IRC | Today's Posts |
|
Thread Tools |
June 29th, 2018, 06:24 | #1 |
TM hk416D hot wires
hi guys,
iv just received my new TM hk416D recoil aeg, i noticed while having a play that the battery and wires were getting hot. i fired about 10 shots on semi and a few bursts on full auto then noticed the wires heating up. didnt want to take it to my next game day before checking this is ok and how hot can they get and still be ok? gun specs below TM HK416D recoil recoil ultimate lonex gear set new spring not sure what but fires at 340 fps Prometheus 6.03 inner barrel Prometheus bucking and flat hop nuprol 7.4v 1450mah 30c battery rear wired standard motor that came with gun thanks guys chris |
|
June 29th, 2018, 09:02 | #2 |
Stock TM wires are cheap. Cheap wires cause greater resistance and heat up. Don't melt the insulation and you'll be fine.
/thread.
__________________
In the North? Want to play airsoft with us? Send me a message! |
|
|
Bookmarks |
Thread Tools | |
|
|