Disassembled a Velocity Arms AK47 - need help with one piece

[tycho]

Hey all,
I got a VA VK47 in a trade and figured it was a good gun to try my hand at modding up. I had it apart, did a basic spring swap/lube and am looking to put it back together, but there's just one piece that I did not notice when it was coming apart.

It's the circled piece in the photo. It's also labelled as "AK-32" in the manual: http://www.uncompany.com/information.../AEGs/ak47.jpg

It's pictured just left of the lower receiver image labelled "AK-1".

Any help getting that puppy back into place would be appreciated.

Thanks!

[Rusty Lugnuts]

it goes way up top, with the spring and bent rod

[666]

I believe this piece goes into front part of magwell and holds magazine in place.

[Rusty Lugnuts]

Right under the dust cover

[666]

Rusty Lugnuts, that silver piece in your picture is also in the manual, look where fake bolt is. I circled it red. AK-32 is a piece that comes with plastic TM style AK receivers, it's there to engage front tooth of the mag. Without that piece mag would not lock in place.

[Rusty Lugnuts]

I see what you mean, i thought the piece in front of the bipod in his picture was the one you were talking about. kinda hard to say without it in our hands

[tycho]

Awesome, thanks guys! Definitely the magwell piece. All back together now!