Airsoft Canada
http://triggerairsoft.com/shop/

Go Back   Airsoft Canada > Discussion > Doctor's Corner
Home Forums Register Gallery FAQ Calendar
Retailers Community News/Info International Retailers IRC Today's Posts

Fix: PTS Masada AKM feeding issue

:

Doctor's Corner

Reply
 
Thread Tools
Old April 30th, 2014, 22:38   #1
Wrath144
formerly steyr
 
Join Date: Sep 2005
Location: Winnipeg, Manitoba
Fix: PTS Masada AKM feeding issue

So a friend brought me his gun with a feeding issue he was having with his Masada. There wasn't much info on google so I figured I'd put what I figured out here for others to find it.

These problems made themselves known in order, and after taking care of all of them the gun feeds great.

Symptoms:

1. Load a new mag, and no BBs fire at all
2. After loading a new mag, it would feed one BB and then stop firing.
3. It will feed 2/3 of the bbs then stop or be shitty after

Problems:

1. BB retainer on the proprietary AKM mags are too long
2. Mags sit too deep in the mag well
3. Follower gets stuck on the last turn

Solutions:

1. File down the BB retainer (go slow, don't take too much off)



2. Place some soft sticky velcro (or other shim material, but velcro is traditionally used for magwell shimming) on the roof of the magazine well near the back. Now the mags won't lock, so you have to dremel the lower surface of the part of the mag that locks into the mag release.



3. Oil your mags. The method I use involves a tube loader, its a lot easier and works a lot better but if you don't have one you can do it the hard way with a click loader. Add a drop of silicon to the top of an empty mag (on the follower) and fuck the shit out of it with BBs in the tube loader. Cycle BBs in and out of it at least 5 times, but I did like 30 just to be sure.
Note: DO NOT fire the oily BBs through your gun. However, excess oil in the mags WILL get on the BBs and WILL get on your hopup rubber, making it kinda shitty but after a few loads of dry BBs it will go back to normal.

I'm pretty sure that's all it needed, but for good measure I also installed an SHS tappet plate as it didn't seem like the original one was drawing back the nozzle all the way.
__________________
BROFORCE
Admin - Winnipeg Airsoft

Last edited by Wrath144; April 30th, 2014 at 23:12..
Wrath144 is offline   Reply With Quote
Old May 1st, 2014, 13:27   #2
Red Dot
Google level: BOSS
 
Red Dot's Avatar
 
Join Date: Dec 2013
Location: Stouffville, Ontario
Great post! I had trouble with feeding on a PTS Masada with PTS PMAGs as well. I removed the BB follower and so far it's been amazing. Got some G&P Evike midcaps to test out tomorrow, they fit even better than the PTS magazines in the Masada.
Red Dot is offline   Reply With Quote
ReplyTop


Go Back   Airsoft Canada > Discussion > Doctor's Corner

Bookmarks

Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off


Airsoft Canada
http://triggerairsoft.com/shop/

All times are GMT -4. The time now is 11:01.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.