|
|||||||||
|
Home | Forums | Register | Gallery | FAQ | Calendar |
Retailers | Community | News/Info | International Retailers | IRC | Today's Posts |
|
Thread Tools |
January 2nd, 2021, 11:33 | #1 |
Proud new member of the ASC community
Just want to say hi to everyone. Looking forward to gaining knowledge about all things airsoft and to contribute back as much as I can with the limited knowledge I have thus far.
|
|
January 2nd, 2021, 12:10 | #2 |
Welcome to airsoft. I understand there are plenty of resources in Edmonton. You should be well taken care of.
|
|
January 2nd, 2021, 12:12 | #3 |
Official ASC Geomorphologist
|
Welcome aboard! This forum, like all forums, has slowed down, but you will still get great answers to technical questions, or any questions really, with a little patience. It might take a few days before you get answers sometimes, but you will get a good answer eventually.
But first pro-tip, upgraditis is a disease, there's really not a lot that you need to upgrade on Airsoft guns nowadays to make them perform great. Even the low end Chinese crap has gotten pretty decent lately. Nowadays its the expensive guns that tend to be absolute crap for the price, like Krytac and Arcturus.
__________________
Keep quiet. Sound travels faster than BBs. Québec province's master age verification representative. |
January 2nd, 2021, 17:06 | #4 |
Thanks venture and Drakker appreciate the warm welcome.
|
|
January 4th, 2021, 12:30 | #5 |
Welcome to forum
|
|
February 8th, 2021, 12:38 | #6 | |
Welcome!
Quote:
__________________
VFC SCAR L CQC, ICS M4 S.I.R., KJ Works Glock 27 GBB |
||
February 8th, 2021, 14:51 | #7 |
Official ASC Geomorphologist
|
The last option. They just don't last or perform all that well. If they were half the price they would be excellent, but at that price you are better off looking elsewhere. If you want purely a show piece you can't beat VFC's externals, they are also grossly overpriced guns considering how bad the internals have gotten lately, but at least they can claim to be the very best at something.
It's easy to know how good internals are... Ask people at your field what brand of guns they have and if they are running them stock. For example, a lot of LCT owner run their guns stock (or added a mosfet like I did), so you know right away that the internals are durable. Ask VFC owners and most people will have replaced parts or did a "full upgrade" because the gun was not performing up to their expectations and they have been badly couseled at upgrade time (face it, when you are a new player, you want the best gun, so upgrading sounds like the way to go... It takes years to finally realize you upgrades are not doing much and you are much better off upgrading the player than the gun).
__________________
Keep quiet. Sound travels faster than BBs. Québec province's master age verification representative. |
February 8th, 2021, 23:06 | #8 |
use it till it breaks as the saying goes. i have a vfc mp5 and a vfc hk 417. the mp5, i have swapped the hop rubber and nub in from stock mound style to v-type rubber, gearbox internals are stock, waiting on inner barrel to arrive (i am getting the stock tri-lug flash hider cut and re-threaded to get rid of the tri-lug section so i can put my flash hider that has a qd stubby suppressor with it, my 417 is currently stock, but i am putting hpa into it (already have a few hpa guns and just prefer that over an electric gb is all it really is) wanting to get my hands on an lct so that i can turn that into a daytona gun.
__________________
current armament: mk43, ump.45, p90, barret, m14, g33, k98, m4 tac, m4 swat, mp5 navy, vsr10, p226, m9.
|
|
February 9th, 2021, 16:01 | #9 |
Administrator
|
Welcome friend!
__________________
|
|
Bookmarks |
Thread Tools | |
|
|