need help on how to remove the gearbox/motor on a G&P M249/Mk46

[Dutch_McBain]

need help on how to remove the gearbox/motor on a G&P M249/Mk46.

i have tried a few times and boy this by far the most complicated i have seen. i have not figured out yet and it's driving me crazy. and i didint find anyting on youtube yet.

so if you have any tips, please help me. thank you.

[ThunderCactus]

take the grip off, take the stock off, take the barrel off

theres a screw that goes into the spring guide thats behind the stock
4 grip screws on the bottom like a regular V2 mechbox
and the barrel/hop unit needs to be out

then it comes up and out

[Dutch_McBain]

thank you, I have done all you said, but the grip won't come out what am I missing.....

barrel off, stock off, screw off, i don't see anymore screw for the grip.

[ThunderCactus]

remove end plate
take motor out
unscrew 4 screws that hold the grip to the mechbox
Pull