KSC Glock 18c Part 258 Issue Solved 2005-07-13

BiffTheAncient · June 16th, 2005, 10:46

Hello,

I was at a game this past Sunday and after using my Glock (1) all day I noticed that the pin that goes in the butt of the slide to hold the fire selector switch was missing (2). This part missing did not seem to impact the performance of the 18c. It fired fine and I switched it from auto to semi and back again, several time (3).

I have checked all of the Retailers at the top of the Page (4) but none seem to carry part 258. So does any one know if any of the retailers stock this part but do not advertise that fact?

Also does any one have any advise on how to prevent this from happening again?

Thanks for your help in advance,
BiffTheAncient

1. KSC Glock 18C w/ Metal Barrel and Slide
2. Part 258
3. I guess pressure from my thumb stopped the fire selector from poping out.
4. Canadian and International Retailers.

lupo · June 16th, 2005, 11:20

You may be missing part #259 aswell if the pin just fell out becuase it is held in place by a small grub screw (#259). You would have to remove the rear sight to check. I may have both parts you are looking for aswell. I will have to check my shop for them.

BiffTheAncient · June 16th, 2005, 11:44

OK.... I have consulted the Part List / Diagram and I see what you mean. I\m pretty sure that part 259 (1) is still where it should be as the the rear sight is still in place.

Does part 258 (2) have a flat spot or other feature that engages the end of the part 259? If it does I may have misaligned them causing part 259 to be loose and prone to flying out under heavy recoil.

Thanks

1. The grub screw under the rear sight.
2. The pin that hold in the fire selector switch.

lupo · June 16th, 2005, 21:38

Yes part 258 does have a slot that 259 fits into and they have to be aligned properly.

BiffTheAncient · July 13th, 2005, 12:31

Part # 258 Has been aquired, properly installed and field tested.

Thanks to all for their assitance.

Oreowarrior · December 6th, 2005, 01:52

Yea my part 258 has gone missing... where did you manage to find a replacement part, retailer?

666 · December 6th, 2005, 02:04

http://www.dentrinityshop.com/pr_lis...SC&pg=5&rpp=10

Donnie Yen · June 8th, 2012, 05:19

Thank you all, gentle men, I've got the same matters. I'll check the #259 grub screw this evening. Although the #258 has been very loose but I have not yet lost it.

For my appreciation, I share with you some more shops which supply the damn things

1. http://shop.ehobbyasia.com/pas-steel...rt-no-258.html
2. http://www.tokyo-model.com.hk/ecshop/goods.php?id=8494
3. http://www.tokyo-model.com.hk/ecshop/article.php?id=27

Home	Forums	Register	Gallery	FAQ	Calendar
Retailers	Community	News/Info	International Retailers	IRC	Today's Posts

British Columbia	Alberta
BCAC	EAR
Op-For	JOC
Northern Arms Airsoft	Skunkworx Airsoft
Airsoft Kelowna	RAAT
Prince George Airsoft	Manitoba
Saskatchewan	MAA
SK Airsoft	Ontario
PDW	Airsoft Ottawa
South Sask Mercs	Snow Dragons
Quebec	1st Ranger Platoon
PQAC	Wolfpack Tactical
1st Pathfinders Regiment	TTAC3
Quebec Airsoft
MTX Airsoft	Atlantic
FAQc	Atlantic Airsoft

June 16th, 2005, 10:46	#1
BiffTheAncient Trader rating Join Date: Feb 2005 Location: Toronto	KSC Glock 18c Part 258 Issue Solved 2005-07-13 Hello, I was at a game this past Sunday and after using my Glock (1) all day I noticed that the pin that goes in the butt of the slide to hold the fire selector switch was missing (2). This part missing did not seem to impact the performance of the 18c. It fired fine and I switched it from auto to semi and back again, several time (3). I have checked all of the Retailers at the top of the Page (4) but none seem to carry part 258. So does any one know if any of the retailers stock this part but do not advertise that fact? Also does any one have any advise on how to prevent this from happening again? Thanks for your help in advance, BiffTheAncient 1. KSC Glock 18C w/ Metal Barrel and Slide 2. Part 258 3. I guess pressure from my thumb stopped the fire selector from poping out. 4. Canadian and International Retailers. __________________ BiffTheAncient "Too many good docs are getting out of the business. Too many OB-GYNs aren't able to practice their love with women all across this country." —George W. Bush, Poplar Bluff, Mo., Sept. 6, 2004 "I'm Brick Tamland. People seem to like me because I am polite and I am rarely late. I like to eat ice cream and I really enjoy a nice pair of slacks. Years later, a doctor will tell me that I have an I.Q. of 48 and am what some people call mentally retarded." -Brick Tamland

June 16th, 2005, 11:44	#3
BiffTheAncient Trader rating Join Date: Feb 2005 Location: Toronto	OK.... I have consulted the Part List / Diagram and I see what you mean. I\m pretty sure that part 259 (1) is still where it should be as the the rear sight is still in place. Does part 258 (2) have a flat spot or other feature that engages the end of the part 259? If it does I may have misaligned them causing part 259 to be loose and prone to flying out under heavy recoil. Thanks 1. The grub screw under the rear sight. 2. The pin that hold in the fire selector switch. __________________ BiffTheAncient "Too many good docs are getting out of the business. Too many OB-GYNs aren't able to practice their love with women all across this country." —George W. Bush, Poplar Bluff, Mo., Sept. 6, 2004 "I'm Brick Tamland. People seem to like me because I am polite and I am rarely late. I like to eat ice cream and I really enjoy a nice pair of slacks. Years later, a doctor will tell me that I have an I.Q. of 48 and am what some people call mentally retarded." -Brick Tamland

July 13th, 2005, 12:31	#5
BiffTheAncient Trader rating Join Date: Feb 2005 Location: Toronto	Part # 258 Has been aquired, properly installed and field tested. Thanks to all for their assitance. __________________ BiffTheAncient "Too many good docs are getting out of the business. Too many OB-GYNs aren't able to practice their love with women all across this country." —George W. Bush, Poplar Bluff, Mo., Sept. 6, 2004 "I'm Brick Tamland. People seem to like me because I am polite and I am rarely late. I like to eat ice cream and I really enjoy a nice pair of slacks. Years later, a doctor will tell me that I have an I.Q. of 48 and am what some people call mentally retarded." -Brick Tamland

June 16th, 2005, 11:20	#2
lupo Trader rating Join Date: Dec 2001 Location: vancouver	You may be missing part #259 aswell if the pin just fell out becuase it is held in place by a small grub screw (#259). You would have to remove the rear sight to check. I may have both parts you are looking for aswell. I will have to check my shop for them.

June 16th, 2005, 21:38	#4
lupo Trader rating Join Date: Dec 2001 Location: vancouver	Yes part 258 does have a slot that 259 fits into and they have to be aligned properly.

December 6th, 2005, 01:52	#6
Oreowarrior Trader rating Join Date: Dec 2005 Location: VirginiaUSA	Yea my part 258 has gone missing... where did you manage to find a replacement part, retailer?

December 6th, 2005, 02:04	#7
666 Trader rating Join Date: Jul 2004 Location: Toronto, Ontario	http://www.dentrinityshop.com/pr_lis...SC&pg=5&rpp=10 __________________ Op Woodsman. Biggest WW2 event in Ontario.

June 8th, 2012, 05:19	#8
Donnie Yen Trader rating Join Date: Jun 2012	Thank you all, gentle men, I've got the same matters. I'll check the #259 grub screw this evening. Although the #258 has been very loose but I have not yet lost it. For my appreciation, I share with you some more shops which supply the damn things 1. http://shop.ehobbyasia.com/pas-steel...rt-no-258.html 2. http://www.tokyo-model.com.hk/ecshop/goods.php?id=8494 3. http://www.tokyo-model.com.hk/ecshop/article.php?id=27

KSC Glock 18c Part 258 Issue Solved 2005-07-13

Gas Gun Solutions