|
|
|
June 3rd, 2012, 01:49
|
#16 |
 E-01
|
Looks like they are adjustable.
Looks like the screw got loose (vibration from recoil will do that). Loose screw caused the sight to fall free. You re-tightened the screw and solved the problem like a boss. But the screw will eventually just loosen up again. So get some Loctite.
__________________
|
|
|
|
June 3rd, 2012, 01:52
|
#17 | |
|
Quote:
When it was off, i looked at the screw hole in the slide, it was filled and i looked at the sight screw hole, it was also filled. what? |
|
|
|
|
|
June 3rd, 2012, 01:57
|
#18 |
|
E-01
|
That didn't make sense so I'm just going to echo the suggestion of epoxy.
__________________
|
|
|
|
|
June 3rd, 2012, 01:58
|
#19 | |
|
|
Quote:
Turning the screw doesnt do anything in moving the sight. |
|
|
|
|
|
June 3rd, 2012, 02:06
|
#20 |
|
E-01
|
It shouldn't. The screw is there to hold the sight in place and keep it from falling off (which I believe was the original problem)
__________________
|
|
|
|
|
June 3rd, 2012, 02:10
|
#21 |
|
Prancercise Guru
|
Remove or loosen screw.
Drift sight in dovetail till centered. Snug screw back in. As long as it's not all plastic some sort of locking compound would be a good idea. Use one with weak rating though.
__________________
Airsoft, where nothing is hurt but feelings. |
|
|
|
|
June 3rd, 2012, 02:16
|
#22 | |
|
|
Quote:
been twisting this allen key for a while, no direction removes it or loosens it (I think it stripped) |
|
|
|
|
|
June 3rd, 2012, 02:17
|
#23 |
|
E-01
|
Oh ffs, would you just Crazy Glue that shit already.
__________________
|
|
|
|
|
June 3rd, 2012, 02:21
|
#24 | |
|
Quote:
|
||
|
|
|
|
June 3rd, 2012, 02:24
|
#25 | |
|
|
Quote:
and I cant crazy glue it cuz im trying to get it back aligned (THE SIGHT IS OFF) |
|
|
|
|
|
June 3rd, 2012, 02:29
|
#26 |
|
Ok guys, fess up. You had me going there for a while.
|
|
|
|
|
|
June 3rd, 2012, 02:44
|
#27 | |
|
|
Quote:
|
|
|
|
|
|
June 3rd, 2012, 02:52
|
#28 |
|
glue them on to the side, it's a popular DIY that makes you into an instant OG
|
|
|
|
|
June 3rd, 2012, 04:47
|
#29 |
|
lol.
Pugs you crack me up. But seriously, the first problem you have is that the screw broke. You probably did strip the screw. Now all hope is lost for the little ones... Just pull the screw out with a pair of pliers, do whatever mods you need to get a centered sight, and superglue it in place. The screw is busted anyways, so why not?
__________________
"May you fight with the strength of ten full grown men." |
|
|
|
|
June 3rd, 2012, 05:17
|
#30 |
|
Screw it grab a welder crank that shit up to 30/700 and weld the fucker. And yes I'm being Super Cereal.
|
|
|
|
  |
|
||||||
| Bookmarks |
| Thread Tools | |
|
|
 |
|
