|
|
|
|
|
||||||||
|
|
|||||||||
| Home | Forums | Register | Gallery | FAQ | Calendar |
| Retailers | Community | News/Info | International Retailers | IRC | Today's Posts |
 |
|
|
Thread Tools |
December 25th, 2011, 17:45
|
#1 |
|
Sgt. Sparkles
|
whould this fit in my real sword 56?
http://www.airsoftparts.ca/store2/in...roducts_id=397
looking to upgrade my hoop up chamber so i dont have to worry about nicking the feed tube when i ram the mag in. wonder if this cnc unit would fit. Last edited by RUSTSPOT; December 25th, 2011 at 17:57.. |
|
|
|
December 25th, 2011, 22:11
|
#2 |
|
Buy it, and let me know! lol
|
|
|
|
|
December 25th, 2011, 22:52
|
#3 |
|
a.k.a. Greedy
|
Not without modification. IMO it's not worth the trouble. The RS hop up is a good unit, you're better off investing in a nice firefly nub and bucking.
Notice the lack of material in the upper rear portion of the RS hop up vs the prowin.  
Last edited by Kozzie; December 25th, 2011 at 22:58.. |
|
|
|
|
December 25th, 2011, 23:53
|
#4 |
|
Sgt. Sparkles
|
Ya but nothing goes to that area. I don't think it would block the mecbox. And the screw taps looks to be in same position. Main consern is the actuating arm ( or what ever its called) and slider might not fit.
|
|
|
|
|
December 26th, 2011, 00:07
|
#5 |
|
Loves Furries
|
Yeah i purchased a Prowin and you need to do some modifications. If you want a better Hopup get a KA Hop up
__________________
 If ASC were real life, there would be no Chuck Norris, only CDN_Stalker MANITOBA IVAN |
|
|
|
|
December 26th, 2011, 14:33
|
#6 | |
|
It will work, but no need for it.
The point of the ProWin hop-up is to screw it to the mechbox to do tests outside the receiver. For the RS mechbox, you will have to do some modifications to make it work. If you need a new hop-up unit, as said, go with KA or buy the RS one back. Or basically any AK hop-up will work.
__________________
Quote:
|
|
|
|
|
 |
|
||||||
| Bookmarks |
| Thread Tools | |
|
|
 |
|
