|
|
|
|
|
||||||||
|
|
|||||||||
| Home | Forums | Register | Gallery | FAQ | Calendar |
| Retailers | Community | News/Info | International Retailers | IRC | Today's Posts |
 |
|
|
Thread Tools |
December 6th, 2011, 16:02
|
#1 |
|
AKS74U from SRC *aeg* problem
i got a aks74u brand new with lipo baterry 11.1 when i select to fire whatever single or full auto you hear the mechbox work but it doesnt shoot...no bb comes out anyone know what the problem could be i'dappreciate it.
|
|
|
|
|
December 6th, 2011, 16:12
|
#2 |
|
i already put tape around the mag so it tight but it doesnt help
|
|
|
|
|
|
December 6th, 2011, 17:03
|
#3 |
|
Loves Furries
|
Open up your mechbox
__________________
 If ASC were real life, there would be no Chuck Norris, only CDN_Stalker MANITOBA IVAN |
|
|
|
|
December 6th, 2011, 17:16
|
#4 |
|
What kind of BBs are you using? Have you tried firing it upside down? After that, take the mag out and shine a flash light down the hop up chamber and fire it. Can you see the air nozzle moving?
__________________
Founder of Capital Airsoft in Edmonton Out of the Game 04/22/16 |
|
|
|
|
December 6th, 2011, 17:35
|
#5 |
|
Are you using a hicap? If so, are you loading and winding it fully?
If a mid, are you loading more than three BB's in the mag at a time?
__________________
Johann Hansen. 1./SS-Pz-Gren. Rgt. 20. 9th SS Hohenstaufen. Ontario's Largest WW2 re-enactment. OP Woodsman. Join us! |
|
|
|
|
December 6th, 2011, 17:38
|
#6 | |
|
Quote:
|
||
|
|
|
|
December 6th, 2011, 17:53
|
#7 |
|
Does it make the fwap noise or does the motor just whine? Common problem on these guns is a faulty bevel gear coming loose on the shaft and not transferring power. If this is the case src will give you a free replacement.
|
|
|
|
|
December 7th, 2011, 11:58
|
#8 | |
|
Quote:
i tried firing uposide down nothing happens, then i took the mag out checked the hop up chamber i dont know if im looking at the air nozzle part but nothing moves at all in there ....and i dont know what you mean fwap noise of whine...i'd say whine...but when i got it the gun worked fine only after shooting a couple of bb's it just stoped working. |
||
|
|
|
|
December 7th, 2011, 12:18
|
#9 |
|
|
The nozzle moves real fast, hard to see. But if it doesn't shoot upside down there's probably something wrong like a broken tappet plate. Also make sure it Isnt jammed.. and by whine I meant the motor free spinning.. does it sound like it did before? Can you take a video?
|
|
|
|
 |
|
||||||
| Bookmarks |
| Thread Tools | |
|
|
 |
|
