|
|
|
|
|
||||||||
|
|
|||||||||
| Home | Forums | Register | Gallery | FAQ | Calendar |
| Retailers | Community | News/Info | International Retailers | IRC | Today's Posts |
 |
|
|
Thread Tools |
June 14th, 2005, 13:03
|
#1 |
|
Benelli Pump Removal
We checked out a diagram at http://www.airsoftplayers.com/manuals.asp but we cant seem to take the pump off.
Any suggestions?
__________________
Private First Class  "I seriously doubt if we will ever have another war. This is probably the very last one." Author: Richard M. Nixon |
|
|
|
June 14th, 2005, 14:39
|
#2 |
|
there are two screws on the bottom of the pump. Remove them. Using a thin knife, try to wege it inbetween the two halves (left and right of the screw) the pump splits directly in half along the same line that it runs with the barrel.
Us houdl eb able to see the seam.
__________________
Noob Hunter 
|
|
|
|
|
|
June 14th, 2005, 15:13
|
#3 |
|
|
yup, we got it, thankyou very much
__________________
Private First Class "I seriously doubt if we will ever have another war. This is probably the very last one." Author: Richard M. Nixon |
|
|
|
 |
|
||||||
| Bookmarks |
| Thread Tools | |
|
|
 |
|
