Diemaco C7A2 project(made in Russia)

[Taito]

Originally Posted by Pretorian

Thanks guys! I did not wish to do dummy ambi selector switch because I saw many pics C7A2 in Canada & Afganistan they have no ambi selector switch . I can show this pics in this post if it is necessary. Engravings are made on the machine tool.

Sorry for my bad English.

No worries Pretorian, we can understand you just fine. I wish machien shops were more common here in the US as I need a barrel drilled and tapped for my AICS (I've got one of the Best Gun M24 Fluted barrels and the screw holes are too far out).

Cheers,
Vic.

[Vince]

The difference here in North America is that this ''expertise'' with CNC is quite expensive. Even the most simple stuff will end up killing your wallet for good...
More often that not you'll need a great volume to have reasonable price for each item. And even if engraving looks simple you'll still need specialised tools to achieve good results, not to mention setup time due to metal body irregular shape.

[Relja]

how much is a real elcan?? Ive seen the replicas up for 200.

[Lakonian]

Originally Posted by Relja

how much is a real elcan?? Ive seen the replicas up for 200.

$1,000+. About as much as a Trijicon ACOG (TA31), LIC.

[Pretorian]

Originally Posted by Pvt Vince

The difference here in North America is that this ''expertise'' with CNC is quite expensive. Even the most simple stuff will end up killing your wallet for good...
More often that not you'll need a great volume to have reasonable price for each item. And even if engraving looks simple you'll still need specialised tools to achieve good results, not to mention setup time due to metal body irregular shape.

I have paid 160 USD for it.

Originally Posted by Relja

how much is a real elcan?? Ive seen the replicas up for 200

290 USD with shipping to Russia. Very used condition without tritium. I have bought it on ebay.com.

[Pretorian]

Now with original TRI AD I.

[theguy]

Looking hot

[Pretorian]

1. ELCAN C79 (RS)
2. Colt Canada TRI AD I (RS)
3. Cadex grip & rail (RS)
4. Colt Canada BUS (RS)
5. Colt Canada plastic handguards (RS)
6. Colt Canada plastic butt stock w butt pad (RS)
7. Canadian Forces issued C7 sling (RS)
8. Canadian Forces issued Eickhorn Bayonet 2000 (RS)

[L473ncy]

What??? How do you even source that RS stuff? (I'm assuming you probably did some things you're not too proud of in order to get your hands on that stuff). What kind of price are you looking at for everything total?

Looks sexy but I bet you it cost more than just getting an RS AR15 right off the bat (but at least you can shoot your friends with your airsoft C7 ).

Also.... I know it's kind of off topic but is there any way I could get my hands on an RS VSS Vintorez stock for relatively cheap (and no I don't want to use a Dragunov stock and pretend I want as close to the real deal as possible as you can understand like how you did your C7 project)? What about an RS PSO-1 or PSO-1-1? I know the 4x might be a bit useless in airsoft but I'll probably use the iron sights if anything (but the 4x might be useful for scouting).

[Vince]

Mmmmmmm getting hands on real stuff isn't hard at all. You might even be aware or a website name Ebay, yeah supposedly you can found some interesting stuff over there

[Pretorian]

All these things was bought at different times in different places within 5 years. Moreover covers for triad itself triad, the green cover for the C79 itself C79, cadex grip and matching rail, butt stock and butt pad was bought separately. They are very hard to find items and I do not think that you can buy the whole kit at once.
As for the price it is not as high as it might seem.


Nothing is impossible but you must be very lucky guy to get a real VSS stock. PSO is easier to find one, but this thing has a very high demand in Russia.
I know russian guys that make airsoft vss. On the pictures it looks good but their buyers say that the quality is not very high

YouTube - Airsoft VSS Vintorez from Magnitogorsk

[L473ncy]

Originally Posted by Pretorian

Nothing is impossible but you must be very lucky guy to get a real VSS stock. PSO is easier to find one, but this thing has a very high demand in Russia.
I know russian guys that make airsoft vss. On the pictures it looks good but their buyers say that the quality is not very high

YouTube - Airsoft VSS Vintorez from Magnitogorsk

.... Hmmm I guess I'll have to fabricate my own, and I don't think I could bring myself to boring out a hole in an RS VSS stock to fit in a motor (if I get one I'd probably have to fit it onto a GBBR).

Anyways.... the plan is to use high quality parts for the base and either fab or find external parts and dremel/modify them to fit.

Anyways your C7 looks good and if you've just pieced it together over a long time I'm sure I could find a few parts and fab the ones I can't then put together a kickass VSS. I'm planning on using it as a DMR/counter sniper.