|
|
|
|
|
||||||||
|
|
|||||||||
| Home | Forums | Register | Gallery | FAQ | Calendar |
| Retailers | Community | News/Info | International Retailers | IRC | Today's Posts |
 |
|
|
Thread Tools |
September 3rd, 2010, 11:22
|
#1 | |
|
Classic army g36 problem
Hey guys,
I seem to have a problem with my classic army mechbox for the g36. What seems to happen is that when the mechbox is in the gun the selector switch when turned to shoot all that is heard is a click however when taken out the mechbox works fine. I know it's not the body which is the problem as my other mechbox works fine in the gun. So is it the selector switch or could it be something else? Also how so you remove and install the selector switch if that is the problem?
__________________
Quote:
|
|
|
|
|
September 3rd, 2010, 12:05
|
#2 |
|
damn, should read your post fully before answering..
i'm not familiar with the body/gearbox interation on a G36 so i have to leave this for other people to answer.. sounds weird though, like the body is squeezing the bushings and causing too much friction. when you pull the gearbox out after trying to fire it, is the piston locked back or is it in the same position as before re-installation?
__________________
"History teaches that all conquerors who have allowed their subject races to carry arms have prepared their own downfall by doing so." -- Adolph Hitler, April 11 1942. Adolph hitler supports gun control.. Do you? Sic Semper Tyrannis. Last edited by doc_pathfinders; September 3rd, 2010 at 12:08.. |
|
|
|
|
September 4th, 2010, 17:52
|
#3 |
|
Has a life outside Airsoft
|
Check your electrical connections, I had to redo mine because they were loose on the gearbox. Caused it to not work in the gun but fine outside of it.
__________________
|
|
|
|
|
September 4th, 2010, 18:47
|
#4 | |
|
|
So the connections from the motor?
__________________
Quote:
|
|
|
|
|
 |
|
||||||
| Bookmarks |
| Thread Tools | |
|
|
 |
|
