|
|
|
|
|
||||||||
|
|
|||||||||
| Home | Forums | Register | Gallery | FAQ | Calendar |
| Retailers | Community | News/Info | International Retailers | IRC | Today's Posts |
 |
|
|
Thread Tools |
August 10th, 2010, 15:17
|
#1 |
|
KA Delta Ring Tight?
just got a King Arms Delta Ring and was wondering is all delta ring is suppose to be really tight when threaded on to the upper receiver? I have a G&P Magpul PTS receiver and it appears that Ican only do 1 or 2 turns before it nearly imossible to put on?
Since its a thread I'm not too sure how to go about getting it loosen? Should just keep turning and work out the coating or is there something worng with it? Thanks Last edited by Silent_Angel; August 10th, 2010 at 15:22.. |
|
|
|
August 10th, 2010, 15:30
|
#2 |
|
Are you talking about the barrel nut? With different companies comes different tolerances. Take it off and use a wire brush or a dremel with a wire wheel to take some of the coating off the threads. Add some grease before reinstall.
__________________
Please email me as I'm not on ASC too often.  Custom Build | Upgrades | Repairs | Maintenance Contact: ghostgunwork@gmail.com / Private Message |
|
|
|
|
August 10th, 2010, 15:46
|
#3 |
|
Tys
|
They're different threading. Use a thread file or a die to recut the threads of the body...or buy a G&P delta ring.
effort vs. cost....I'd just buy a G&P delta ring. |
|
|
|
|
August 10th, 2010, 16:11
|
#4 |
|
|
I see thanks. is there a large tollerence differnce or just +/- 0.005" kind of thing?
Last edited by Silent_Angel; August 10th, 2010 at 16:42.. |
|
|
|
|
August 10th, 2010, 17:04
|
#5 |
|
It's more a difference on the threading dimensions than tolerance at this level.
__________________
Tous les jours nous nous endormons plus instruits mais pas forcément moins bêtes... I can do a CTRL+ATL+DEL on your gun ! Gun doc in Montreal on AEG, GBB, GBBR and Bolt rifle (gaz and spring) Heavy custom builder (including painting) 
|
|
|
|
 |
|
||||||
| Bookmarks |
| Thread Tools | |
|
|
 |
|
