Mp5 Tight Bore

[shiftline]

Awesome, thank you

last question! (i hope) any big differance from 300mm vs 363mm on a stock tm mp5 cylinder?

[CDN_Stalker]

Originally Posted by shiftline

Awesome, thank you

last question! (i hope) any big differance from 300mm vs 363mm on a stock tm mp5 cylinder?

My velocity in my MP5SD went from 367fps to 387fps by adding an extra 100mm of inner barrel, so you do the math.

Likely you won't see much of an increase in accuracy, nor in extra range. The hop up rubber change and heavier ammo will give you a noticable improvment though.

[shiftline]

haha well you are in the middle of the 2!


so 363mm it is along is the clear hop-up > this one or the Black one The clear says for guns under 400fps. no idea what mine is.. TM with 17%pdi and prob a 363mm tight bore soon


and might have to order some .28's soon you guys are expensive! lol

I was reading about sorbo pads. are they worth adding to "quiet" the gun.. would you loose velocity bt adding it on to the piston head?

[CDN_Stalker]

You shouldn't. What motor do you have in it? You can make it quieter by going with an EG700 if you have an EG1000 in it right now. Likely yours is a stock TM so it should already have the 700 in it. Add the Sorbo pad and it should be pretty good for quiet, a bit more if you have a suppressor a bit longer than your inner barrel.

[shiftline]

I believe its the EG700 Pro/special or something along those lines.. so ill add in some sorbo's

For hop up rubbers which is recommended

Guarder clear
Guarder black improved
systema energy

also would a mp5/m4 both use the same one? (might redo both guns)

[shiftline]

Any opinions on hop-up rubbers?

[CDN_Stalker]

I still prefer the clear, have it in all my guns currently, and have used them for years. Have tried out a few other types also, RH65, Guarder black, Madbull rubber ones (they suck due to leakage), and I still went back to the Guarder clear.

[shiftline]

Works for me, so they are the same for all guns, mp5 and m4?

[shiftline]

We will just hope its a yes.. now i just have to wait for the packages to arrive!
thanks for your help guys.

[CDN_Stalker]

Originally Posted by shiftline

Works for me, so they are the same for all guns, mp5 and m4?

Yes, same for all AEGs.