L96 arctic warfare need help

[RxBandit]

Hi, I have a L96 arctic warfare and my girlfriends brother was screwing around with it and lost one of the pins that the bolt action uses. It's the one that allows you to push the bolt down after you push it forward then pull it back does anyone know where I can get another one? Also he jammed I'm guessing 4 + bb's in the barrel\breach. If anyone can help that would be great thanks.

[ThunderCactus]

Well I don't know what kind of bolt it uses, but the other end of your cleaning rod is, infact, an unjamming rod!
Just jam that sucker down your barrel with the bolt back and it'll force those BB's out!

[Soulfly]

There's a square pin the goes up through the trigger box, and into the cylinder that holds the spring guide in place while the cylinder can move back and forth..

Then, there is a pin on the bolt itself, And when you're cocking it, If you press it down hard enough while the bolt is towards the buttstock, You risk losing a very small pin, and that pin won't let you put the bolt handle down after being cocked...

[Kos-Mos]

I had a rifle that didn't have one.

Made one with a nail and a dremel.

I have never seen it online anywhere.

Also, there is a spring and a second pin working along theses. Basically, you are looking at a pin exactly the lenght of the handle section. When you push the bolt forwards, that pin is pushed against the receiver and lets you fold the handle and lock the bolt in place.