|
|
|
|
|
||||||||
|
|
|||||||||
| Home | Forums | Register | Gallery | FAQ | Calendar |
| Retailers | Community | News/Info | International Retailers | IRC | Today's Posts |
 |
|
|
Thread Tools |
October 26th, 2009, 16:37
|
#1 |
|
Sorbo Pad?
I recently bought a VSR-10 from shootsoft.
I know its crap soft. I just wanted to see what i could do with it (YAY disposable income!) I sanded it down, repainted it, etc. But know I really like it. Anyways... I've been looking into some internals that i could buy for it and I came across Sorbo pads? 1) what are they? 2) what other internals can I buy for my VSR-10, cause I heard that some parts that are "VSR" compatible, aren't... Appreciate any feed back |
|
|
|
October 26th, 2009, 16:45
|
#2 |
|
Tys
|
If you type VSR10 into the search field at the top...you get back LOTS of info...
These are two very helpful ones...might have to reread them after you've found out more of what's what...but they're good. http://www.airsoftcanada.com/showthread.php?t=27286 http://www.airsoftcanada.com/showthread.php?t=37455 Unlikely that either of them mention sorbo pads...you can use the search for that as well. - sorbothane is a squishy rubber that spreads the impact shock from the piston over a longer period of time...preserving the lifespan of the pieces that take the shock. |
|
|
|
|
October 26th, 2009, 23:45
|
#3 |
|
goto any major retailer:
redwolfairsoft uncompany airsoftgi etc. search VSR and you will find all kinds of VSR parts available. PDI and Laylax parts will be the most common for VSR. once you know which parts you want.. ask here again. Also you can goto google and search VSR upgrade guide. Various guides out there for upgrade parts. |
|
|
|
|
October 27th, 2009, 17:31
|
#4 |
|
|
Thanks everyone for the response
 I was looking at some internals online and one part i had a question about was: PSS10 Stainless Taper Cylinder Head VSR-10 what exactly is that used for? I'll probably end up getting it anyways. (once again: yay disposable income!) |
|
|
|
|
October 27th, 2009, 17:40
|
#5 |
|
... send some of that income my way dang nammit!
|
|
|
|
|
October 27th, 2009, 17:43
|
#6 | |
|
Quote:
__________________
 Delenda Est Carthago |
|
|
|
|
|
October 27th, 2009, 17:53
|
#7 |
|
|
LOL.
Can someone explain to me what the "sp" means with regards to springs? |
|
|
|
|
October 27th, 2009, 17:54
|
#8 | |
|
Quote:
 . I was just talking about him (Kevin Sorbo, for the new guy) with a friend of mine about his old shows. Not a bad actor.Quick edit. Kingly, Id go read the upgrade stickies there a great help. There are 2 of them I think one on smart/non smart upgrades and the other on what should be the why you should upgrade that part. I know it took me a little while to understand it all before I went and put together my G-spec. Personally I dont use a Sorbo on mine. PDI 330 spring in it and Ive had guys tell me they cant hear that gun past 10 feet. As far as what I did for mine here it is. - PDI 6.01mm inner barrel (G-spec) ** - PDI ZERO-Trigger ** - PDI VSR-10 Precision Cylinder Set VC ** - PDI Cylinder Head short Stroke ** - PDI 330 Spring (486 fps with the inner barrel 6.01) ** - PDI Barrel spacer (G-Spec) ** - Bushnell Scope - Spring ejected Bipods
__________________
Last edited by Outcast569; October 27th, 2009 at 17:59.. |
|
|
|
|
 |
|
||||||
| Bookmarks |
| Thread Tools | |
|
|
 |
|
