|
|
|
|
|
||||||||
|
|
|||||||||
| Home | Forums | Register | Gallery | FAQ | Calendar |
| Retailers | Community | News/Info | International Retailers | IRC | Today's Posts |
 |
|
|
Thread Tools |
June 27th, 2009, 03:30
|
#1 |
|
fps upgrade
if i wanted to upgrade the fps on my weapon, and all i did was change the spring, would i need to change anything else, or would it be fine with just a spring change?
__________________
"I never put myself in the hole, without bringing a ladder" |
|
|
|
June 27th, 2009, 03:32
|
#2 |
|
Make sure your battery can pull the spring.
__________________
  Ár skal r?*sa, sá er annars vill fé eða fjör hafa. Sjaldan liggjandi úlfur lær um getur né sofandi maður sigur. |
|
|
|
|
June 27th, 2009, 03:33
|
#3 |
|
A-56 aka Mr.Hitman
|
What gun are you running to upgrade?
|
|
|
|
|
June 27th, 2009, 09:53
|
#4 | |
|
If you have nylon bushings, put in metal ones. Also if it's a lower-end gun changing the piston probably wouldn't hurt.
__________________
 Quote:
Last edited by kalnaren; June 27th, 2009 at 11:43.. |
|
|
|
|
|
June 27th, 2009, 10:10
|
#5 |
|
formerly Sepulcrum
|
How strong of a new spring? what's target Fps? I assume you want 400 right? go for 380, AEGs get that no prob with M100 - M110 spring if you have a good seal in the hopup and a tightbore.
|
|
|
|
|
July 11th, 2009, 11:28
|
#6 |
|
|
trying to get my m4 up to round 400 sitting at 370 flat. but a new spring plus 9.6 should handle it?
__________________
"I never put myself in the hole, without bringing a ladder" |
|
|
|
|
July 11th, 2009, 11:34
|
#7 |
|
A-56 aka Mr.Hitman
|
Metal bushings, ball bearing spring guide, m120 spring.
If you want your gearbox to be stable, get a MASK sorbo piston head, and/or MASK sorbo cylinder head which requires you to remove teeth, or you could buy the Modify one which is already removed for you. |
|
|
|
|
July 11th, 2009, 11:48
|
#8 | ||
|
|
Quote:
__________________
Quote:
|
||
|
|
|
|
July 11th, 2009, 18:01
|
#9 |
|
Official ASC Bladesmith
|
Might want to buy a spare tappet plate and maybe spare gearset too, 9.6V batteries tend to kill those pretty quick. An 8.4V battery, high mAh will pull any spring that spits out at 400fps easily as long as the shimming is fine. And as above, 400fps is rather useless to go for anyways, I actually downgraded one of my MP5s from 400fps to around 360-370fps because I saw the worst performance out of it last year than in previous years when it sat around 380fps. And I always use 0.28g BBs and 8.4v 3000+mAh batteries.
|
|
|
|
 |
|
||||||
| Bookmarks |
| Thread Tools | |
|
|
 |
|
