Airsoft Canada - View Single Post

mcguyver · December 14th, 2009, 11:09

The roller shouldn't move.

The modified hop-up makes use of this with the addition of a thicker silicone rubber to increase deformation of the roller to allow more consistancy shot-to-shot.

Torn rollers should be replaced.

All the aftermarket units I've seen apply this principal as well. Some however have had this portion fail to remain fixed, and the result was poor performance. I had 4 of the EA adjusters give out on me in this fashion, but Steve says the issue is fixed now, last I spoke with him.

December 14th, 2009, 11:09	#127
mcguyver Trader rating Join Date: Aug 2005 Location: Northern Alberta	The roller shouldn't move. The modified hop-up makes use of this with the addition of a thicker silicone rubber to increase deformation of the roller to allow more consistancy shot-to-shot. Torn rollers should be replaced. All the aftermarket units I've seen apply this principal as well. Some however have had this portion fail to remain fixed, and the result was poor performance. I had 4 of the EA adjusters give out on me in this fashion, but Steve says the issue is fixed now, last I spoke with him. __________________ Age verifier Northern Alberta Democracy is two wolves and a sheep discussing what's for dinner. Freedom is the wolves limping away while the sheep reloads. Never confuse freedom with democracy.