View Single Post
Old April 6th, 2007, 12:47   #33
CalvinTat
 
CalvinTat's Avatar
 
Join Date: Sep 2005
Location: Red Deer
1) Make and Model
--P226 Tokyo Marui
2) Date Purchased
-- April 2007
3) Cost
-- $300
4) New/Used?
-- New
5) Mechanical Problems
-- N/A
6) Esthetic Problems
-- Scratching due to gun being full metal
7) Rounds Fired Between Failures
-- ~150 rounds by me, no failure yet.
8) Changes to Internals/ Upgrades
-- Guarder Metal Frame installed April 5, 2007
-- Guarder Metal Slide installed April 10, 2007 - Intensive modification to block/slide required to fit properly
-- Guarder Piston Lip April 5, 2007
-- Guarder Enhanced Loading Nozzle - April 5, 2007
-- Guarder Metal Outer Barrel - April 13, 2007
-- Guarder 150% Recoil Spring - April 13, 2007
9) Resale Date and Value
-- N/A
10) Additional Notes
-- To potential Frame purchasers, left hand side of frame DOES NOT have threading, this has occurred -- on two Guarder Frame and Slide Kits and I am unsure if other production Frames suffer from this -- issue.
-- There are issues with the Guarder hammer spring that prevent usage, opening for hammer is too large -- and prevents proper function. That is however, a Guarder issue not a TM problem.
11) Fixed Issues
-- Slide does not lock back 100% when magazine empty, likely due to propane use on plastic slide.
-- Problem no longer occurs after the upgrade to a Guarder Metal Slide

Will update as issues occur
__________________
RAINBOW SALAD!!!!!

If practice makes perfect, yet nobody is perfect... Why practice?

Last edited by CalvinTat; April 13th, 2007 at 21:20..
CalvinTat is offline   Reply With Quote