Airsoft Canada - View Single Post - Bolt action Sniper FPS / Spring upgrade questions

Drakker · April 11th, 2021, 22:29

The Classic Army SR40 is mostly VSR10 compatible, you'd have to check if it comes stock with 45 or 90 degrees sears. 45 degrees sears can't handle strong springs for long, so you'd need to upgrade your trigger unit and piston before using a stronger spring.

For the Well, I have never seen that one around, but from looking at it, my guess is that it's a clone of the Tokyo Marui M40A5 for the internals, so L96 parts probably won't fit. The M40A5 has a shorter cylinder, so a longer spring in there would not allow you to cock it completely, and it would certainly not feed a BB because it needs to go all the way back to load a BB from the mag and push it along the loading ramp. But double check this, it might be another completely different system.

April 11th, 2021, 22:29	#4
Drakker Official ASC Geomorphologist Trader rating Join Date: Sep 2009 Location: Montr?al south shore, Qc	The Classic Army SR40 is mostly VSR10 compatible, you'd have to check if it comes stock with 45 or 90 degrees sears. 45 degrees sears can't handle strong springs for long, so you'd need to upgrade your trigger unit and piston before using a stronger spring. For the Well, I have never seen that one around, but from looking at it, my guess is that it's a clone of the Tokyo Marui M40A5 for the internals, so L96 parts probably won't fit. The M40A5 has a shorter cylinder, so a longer spring in there would not allow you to cock it completely, and it would certainly not feed a BB because it needs to go all the way back to load a BB from the mag and push it along the loading ramp. But double check this, it might be another completely different system. __________________ Keep quiet. Sound travels faster than BBs. Québec province's master age verification representative.