|
I see what your getting at. Yes, i have a modify nozzle with a single o-ring. I tested the whole cylinder/nozzle together and it had very good compression after i changed out the o-ring.
I didnt test the nozzle itself, because i wasnt exactly sure how i could do this without some how pressurizing the cylinder with the piston out, and cover the port and end of the nozzle.
Im going to take the barrel/hopup out, and clean everything as best i can, and see if that helps at all. Are you guys using any sort of lubrication on your hop up rubbers, or do you generaly use them dry?
Thanks
Ryan
|