Airsoft Canada - View Single Post

Janz99 · May 13th, 2009, 13:50

Im using an 8.4v 1100mah battery that came with the gun. I did all the upgrading work myself, but im very confident in my mechanical abilities.

Ive double checked the shim job twice now to make sure it wasnt to tight when the case is bolted up. I can sping the gears freely with my fingers (1-2 revolutions with a decent spin).

Ive tried both my modify S110(420fps) spring and an S120 spring(450fps) without any luck. Ive put the stock spring back in and it works fine. At this point i think the stock motor just doesnt have the grunt to pull back a stiffer spring.

Amos- Shoot me a PM with your pricing and when your normaly available to look at guns. I might have you take a look at it if you dont mind.

THanks
Ryan

May 13th, 2009, 13:50	#4
Janz99 Trader rating Join Date: Apr 2009 Location: Winnipeg	Im using an 8.4v 1100mah battery that came with the gun. I did all the upgrading work myself, but im very confident in my mechanical abilities. Ive double checked the shim job twice now to make sure it wasnt to tight when the case is bolted up. I can sping the gears freely with my fingers (1-2 revolutions with a decent spin). Ive tried both my modify S110(420fps) spring and an S120 spring(450fps) without any luck. Ive put the stock spring back in and it works fine. At this point i think the stock motor just doesnt have the grunt to pull back a stiffer spring. Amos- Shoot me a PM with your pricing and when your normaly available to look at guns. I might have you take a look at it if you dont mind. THanks Ryan