Quote:
Originally Posted by m102404
with a bearing spring guide, a Modify S100 will probably put you there. A lot of other factors affect it.
A S110 might put you just over 400fps with other upgrades installed and a tight setup....so if you want to be safely under limits (not sure what yours are) go one step down.
The diameter of some springs are just a hair too big for some bearing plates on spring guides. It's hard to notice this until the spring is under load (i.e. trying a shot). The piston body will jam/bind the end coils of the spring on the bearing spring guide....essentially locking the piston. Depending on the body it can be a bugger to get apart at this point as well.
Hedge your bets and stick with the same manufacturer for the spring guide/spring.
Best of luck,
Tys
|
The limit here for outdoors is 425, and 350 for indoors. I ended up ordering a modify s110 spring, shim kit and a new modify air nozzle. Mod list so far is:
-modify bearing spring guide, bearing pistion head, air nozzle and s110 spring, and a madbull tight bore barrel. I also ordered a new hop up rubber.
Ill be re-shimming the gear box, cleaning and assembling everything. Hopefully this will be keep the gun reliable and accurate.
Thanks for the advice guys!
Ryan