Airsoft Canada - View Single Post

Hauptmann Dosman · May 4th, 2009, 00:38

In the last 6 months I have bought 3 systema springs to put into my and a friends aeg. The springs were an M100, 1J and another 1J, its one of the 1J that is long.The first two were all well and good but the third is 3/4" to 1" longer then all the rest(the systema's), and 1 1/2" longer then a stock TM, which the 1J springs are replacing.

I am wonder why this is. The lenght is going to make putting the spring in hard, so can i cut down the spring or what?

May 4th, 2009, 00:38	#1
Hauptmann Dosman Trader rating Join Date: Oct 2006 Location: Bruce County, Ontario	Spring lenght In the last 6 months I have bought 3 systema springs to put into my and a friends aeg. The springs were an M100, 1J and another 1J, its one of the 1J that is long.The first two were all well and good but the third is 3/4" to 1" longer then all the rest(the systema's), and 1 1/2" longer then a stock TM, which the 1J springs are replacing. I am wonder why this is. The lenght is going to make putting the spring in hard, so can i cut down the spring or what? __________________ If I knew there was this much walking, I would have joined the Navy!