Well, the trigger contact was binding a little bit, so I loosened the screws on the box that's holding everything together.. Everything's moving nice and freely, but it's still 3-4-5 shot bursting.
When the trigger goes forward there is a little bit of sparking, but it's not getting held forward.
My cut off lever is moving completely freely with no signs of extreme wear. I've used this gun maybe... 6 times, 4 of those were at 250 FPS, and the other 2 were at 390 FPS (The guns comes shooting 450 stock)
Only thing I've noticed was my Systema V3 Spring guide (end plate changed out for the one needed for the 97B) is horribly bent... but that doesn't effect anything.
I'm thinking the problem lies within the trigger contacts.. but... any more suggestions on how things should be set up would be helpful.
I'll re-assemble then make a video of what this thing is doing.