Quote:
Originally Posted by gerardcb
hmm...well then wat else could b causing the bolt not locking back? Isnt it almost impossible for the sears to b the problem because i mean its a laylax zero trigger used for only like 2 months.
|
If you disassembled it and re-assembled it there's a chance you didn't put a spring or two back in the right place.
... What are your cylinder specs? IIRC the Zero trigger has a strangely shaped sear that locks onto the piston... If you're using the stock marui piston the end of your piston may have stripped causing it to slip off... But this is all speculation, I don't have any experience with Zero Triggers (only PDI's V-Trigger)
Do a test for me, take the cylinder out and reach in to the sear that'll be in the body, try pushing on it.. it shouldn't move until you press the trigger down.