Airsoft Canada - View Single Post

Amos · March 28th, 2009, 16:50

Normally bolt not locking back = broken sear but if you've disassembled the zero trigger you may have not put a spring back in the right place..

Rough bolt pull can be because a lack of lubrication between the cylinder and the body of the rifle... or if you've got a scope mount (assuming it's a VSR) and you've tightened the screws too far the screws could be causing friction.

What company and gun is this?

March 28th, 2009, 16:50	#2
Amos Trader rating Join Date: Aug 2006 Location: Japan	Normally bolt not locking back = broken sear but if you've disassembled the zero trigger you may have not put a spring back in the right place.. Rough bolt pull can be because a lack of lubrication between the cylinder and the body of the rifle... or if you've got a scope mount (assuming it's a VSR) and you've tightened the screws too far the screws could be causing friction. What company and gun is this? __________________ Custom Builds: FA3674U Krinkov G3SD6 Last edited by Amos; March 28th, 2009 at 16:52..