Quote:
Originally Posted by ILLusion
I'm not sure who sells aluminum ones. Just stick to a polished one that's plated to prevent corrosion
|
Hm, if you were to compare the taper KM ones to a systema n-b electroylezed ones, which one would have less friction?
Quote:
Originally Posted by ILLusion
G&P makes it too. I can also order that for you if you need.
|
I found a special one on ehobby, it says it's made for lipos in the buffer tube, I'm guessing it will be a bit thinner to have more space inside? Or deeper... Unless G&P has the same one:
http://shop.ehobbyasia.com/catalog/p.../category/152/
And are you able to get your hands on a G&P body b type? XD haha I know redwolf and EVIKE (bad reviews recently) have them :P
Quote:
Originally Posted by ILLusion
Yes, the sound is mostly the sound of the gear teeth engaging each other. Helical gears don't have this sound as much.
|
Hm... I guess I will be getting helical gears then. Juggz has some hurricane ones. But I hear everyone says SYSTEMA HELICAL, never hurricane lol. In terms of sound and durability, how do these two compare, if you know?
Quote:
Originally Posted by ILLusion
Well... yes. Like I said, quick spring swap ability, spring tension release levers, the ability to split the gun/gearbox for storage, etc.
|
I guess these really don't matter to me... I guess any reinforced one will do. How about the CNC ones, will they be a lot stronger then say a G&P reinforced gearbox shell?
http://ebaybanned.com/product_info.p...oducts_id=1517
Quote:
Originally Posted by ILLusion
If you're mashing two materials together, it's common sense that the softer of the two materials would wear down first. Right? Titanium has a high strength to weight ratio, but steel can still be harder than titanium (depending on what grade of steel), which means the titanium teeth would still fail against steel gear teeth. It would just take longer to fail. Anyways, in your scenario, I wouldn't worry too much about that - you should be able to get by with a standard polycarbonate piston just fine.
|
Hm... Alright. If you were to compare polycarb and POM, which one would be better? haha. How about if one last tooth is reinforced? Would that kill the gears at all? Plus I heard those half teeth(not half reinforced) are for helical gears, but then some other ppl say it's for hi torque... I'm pretty confused.
From full out metal teeth, to half, 3 and 1, which do you think is best for around 400 fps?
In that note, I guess I would really like a metal piston with polycarb teeth LOL! haha if only it existed
Also, I heard somewhere the RED systema pistons have badly placed teeth or something? I know on ehobby asia has a cylinder set with silent cylinder and piston head set and red piston >>
But again, I don't wanan kill the striking sound, if that's waht it does :P
Quote:
Originally Posted by ILLusion
Systema and Angel Silent Head Sets is a HEAD SET. That means it comes with the silent piston head AND a matching silent cylinder head.
|
Hm, thing is I really hate the zip sound, but I really don't mind the bam sound of the piston head striking the cylinder head. If I would want more of this sound, a metal one would be better right? But I know that you're supposed to stay away from metal piston heads for durability of gearbox. If I wanted to get louder striking sound, and persay it means to get a metal piston head, should I be worried about anything else's durability other than the piston head and cylinder head?
Quote:
Originally Posted by ILLusion
400 with a Prometheus would have a longer effective range, but that gun won't be usable at most indoors games in Ontario and even across the country. Consider what that particular gun is going to be used for.
|
Ya I just kinda made up my mind after you said that. Pretty simple but ya haha didn't think of it that way. I will have a really nice mp5 soon at around 330 fps, but I think it'd be kind silly to use a carbine m4 in cqb lol... Plus I really like the look of 407mm prometheus barrels on carbine models (a bit of nice chrome showing under the falshhider). I guess I could upgrade a tanio koba inside my mp5 instead in case I woudl want to field it outdoors. A mp5 hopup and a tanio koba = pwnage =]
plus you ahve those nice firefly buckings and rubbers, righ? =]
So for close to 400 fps, but not over, I guess m120 would do it, becuase the modify s100 is 369 but then the s110 is like 410... kinda dumb imo
And again, Illusion, thanks for putting up with my noobiness :P
Oh... one last thing. I have a G&P M120 atm. I kinda wanna sell it and start ALL OVER, but then again I could just start with it. With the stuff I've kinda stated I want, do you think it's cheaper to start new or use current?
I'm selling for around 200 bux.
And about the motor, I have a G&P m120 hi speed running the m120 gearbox around 23 rps. With the hi torque gears, would it turn the rps to around 15? Or should I just get a EG700, plus I like the sound of the EG700(least sound!
)
***
THANKS THANKS THANKS~!!!!***