Quote:
Originally Posted by m102404
Anyone know of somewhere in Toronto/GTA/not-too-far-away I can either:
1. Get the software/cables/RIB/etc... that I need to program a Motorola Saber 1E?
|
Ask Brakoo said, the cables etc can be had on Ebay etc. The software is another matter. It's hard to get a hold of and Motorola will FUCK YOU if they catch you using it without a license (around $600, IF they think you are OK to buy it)
The computer HAS to be a 486DX50 (486 running at 50 mhz) processor or you will brick the radio. The Motorola software runs on DOS 6 and is 100% command line. If you don't perform the procedure right, you can brick the radio.
Quote:
Originally Posted by m102404
2. Take my radio to get the programming changed up a bit?
Thanks,
Tys
|
Be careful what you ask for when you get there. The Sabers broadcast at 5W, and some places won't program GMRS/FRS freqs for you because they know that will make the radio illegal.
They won't program outside of those freqs unless you have a license.