Airsoft Canada - View Single Post - Motor for A&K SR-25 (M130)

PaCHeKo! · January 18th, 2009, 15:51

Hi,

I think the stock motor in my A&K SR-25 can't pull the M130 spring anymore... Is that possible?

I installed a new cylinder, piston and nozzle and when I tried to test the final result the spring got pulled a bit than eveything got stuck. I hear a clicking noise when I pull the trigger and the cables from my battery are getting hot.

I dissambled the mechbox to see if everything was in order. After the double check, everything looks fine in the mechbox. It's not my first time playing with a V2 gearbox so I don't expect stupid errors here *knocks on wood*.

I tried my SR-25 motor in my G&G GR-16 (M120) and it worked fine.

So I guess I need to change my motor to a superior brand.

Any suggestions? These are the one I had in mind ; G&P M160 or Guarder Infinite Torque-UP

Thank you for your time and help!

And because I really appreciate your help .. GUN PR0N!

January 18th, 2009, 15:51	#1
PaCHeKo! Trader rating Join Date: Jan 2008 Location: St-Jérôme, Québec	Motor for A&K SR-25 (M130) Hi, I think the stock motor in my A&K SR-25 can't pull the M130 spring anymore... Is that possible? I installed a new cylinder, piston and nozzle and when I tried to test the final result the spring got pulled a bit than eveything got stuck. I hear a clicking noise when I pull the trigger and the cables from my battery are getting hot. I dissambled the mechbox to see if everything was in order. After the double check, everything looks fine in the mechbox. It's not my first time playing with a V2 gearbox so I don't expect stupid errors here knocks on wood. I tried my SR-25 motor in my G&G GR-16 (M120) and it worked fine. So I guess I need to change my motor to a superior brand. Any suggestions? These are the one I had in mind ; G&P M160 or Guarder Infinite Torque-UP Thank you for your time and help! And because I really appreciate your help .. GUN PR0N! __________________ P.M.C. - Prostituée Militaire de Campagne. Last edited by PaCHeKo!; January 18th, 2009 at 15:55..