Airsoft Canada - View Single Post - TSD/WELL VSR-10 Review(MB03)

andthenhewent · November 7th, 2008, 16:25

hey, and while we're talking about it, how do you specifically Teflon tape the cylinder head? People seem to say "DO IT", but is it 1/4 inch that you put around it?

Also, are there any other parts that I could Teflon tape that would be beneficial in terms of FPS increase? A silencing factor would be great as well, but not if it takes away from my muzzle velocity.

One cm long. Unscrew the cylinder head and put about 1 revolution of tape onto the threads counterclockwise. This is to make sure that it doesn't unwravel as you screw it back together.

November 7th, 2008, 16:25	#156
andthenhewent Trader rating Join Date: May 2008 Location: Atlanta, Georgia	hey, and while we're talking about it, how do you specifically Teflon tape the cylinder head? People seem to say "DO IT", but is it 1/4 inch that you put around it? Also, are there any other parts that I could Teflon tape that would be beneficial in terms of FPS increase? A silencing factor would be great as well, but not if it takes away from my muzzle velocity. One cm long. Unscrew the cylinder head and put about 1 revolution of tape onto the threads counterclockwise. This is to make sure that it doesn't unwravel as you screw it back together. Last edited by andthenhewent; December 3rd, 2008 at 19:54.. Reason: figured it out.