Quote:
Originally Posted by YourNoob
Hey guys, would a TM metal slide fit an HFC glock 26?
From what i know, the HFC is a 100% marui clone.
|
Nope. My HFC G17 is no where close to taking the TM G17 slide I have. Same the other way round. So not all HFC and direct fits.
Quote:
Originally Posted by Conscript
I'm pretty sure that the HFC Glock 26 is a clone, I just swapped some parts and interchanged some springs from a salvaged TM Glock 26.
|
If it's anything like the G17, the spring setup in the HFC is different. HFC uses a double spring recoil setup.
Quote:
Originally Posted by YourNoob
nah man the one im getting is a plastic slide.
I heard that propane/green gas is too strong for plastic slides so that eventurally the plastic ones will wear out alot faster than something that would weigh more
|
Highly doubt it. Propane is green gas. What are you going to shoot your gun with if both are "too strong' for the plastic slide?
My TM G17 is all plastic. I'm the 2nd owner and it has held up flawlessly with propane. Since I got it back in the spring, I've put through close to 100 mags worth and no issues whatsoever.
If you get a heavy metal slide, you'll have to change out the springs anyway.
G17 HFC mags will work on TM but not the other way around. Not 100% on the G26 but it's likely the same issue. Mag well in the HFC is too tight for the Marui mags to fit.